An investigation on fretting wear behaviour of MOS2-bonded coating on AISI 4340 steel

被引：4
|
作者：
Ramesh, R. [1 ]
Gnanamoorthy, R. [1 ]
机构：
[1] Indian Inst Technol, Dept Mech Engn, Madras 600036, Tamil Nadu, India
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2007年 / 221卷 / J1期
关键词：
fretting wear; molybdenum disulphide coating; steel; mechanisms;
D O I：
10.1243/13506501JET171
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fretting wear characteristics of Molybdenum disulphide (MoS2)-bonded solid lubricant coating on structural steel, AISI 4340, when fretted against hardened-tempered bearing steel, AISI 52100 are reported in this paper. Fretting wear tests were conducted at different normal loads and at constant slip amplitude of 60 mu m. Coefficient of friction under fretting conditions and wear resistance were measured. The MoS2-bonded solid lubricant offers improved fretting wear resistance against bearing steels. Substrate hardness has influenced the coating behaviour at high loads. The fretting wear resistance also depends upon the normal load and the nature of contact, stick slip, or gross slip.
引用
收藏
页码：41 / 47
页数：7
相关论文
共 50 条
  • [31] Stable crack extension through AISI 4340 steel: Experimental investigation
    Mourad, AHI
    Alghafri, MG
    Abu Zeid, OA
    ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2, 2004, 261-263 : 207 - 212
  • [32] Fretting behaviour of AISI 301 stainless steel sheet in full hard condition in contact with AISI 52100 steel
    Hirsch, M. R.
    Neu, R. W.
    TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2008, 2 (01) : 3 - 9
  • [33] The behaviour of AISI 4340 steel coatings on low carbon steel substrate produced by friction surfacing
    Silva, K. H. S.
    Brito, P. P.
    Santos, I. B.
    Camara, M. A.
    Abrao, A. M.
    SURFACE & COATINGS TECHNOLOGY, 2020, 399
  • [34] Influence of oil and water media on fretting behaviour of AISI 52100 steel rubbing against AISI 1045 steel
    Ren, PD
    Chen, GX
    Zhu, MH
    Zhou, ZR
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2004, 14 : 364 - 369
  • [35] Effect Of Plasma Nitration Process At Various Temperatures On Wear Behavior Of AISI 4340 Steel
    Basak, Hudayim
    Duzcukoglu, Hayrettin
    Senyurt, Muhammet Ali
    GAZI UNIVERSITY JOURNAL OF SCIENCE, 2018, 31 (02): : 600 - 614
  • [36] The wear behaviour of duplex treated AISI 5140 steel
    Totik, Yasar
    Alsaran, Akgun
    Celik, Ayhan
    Efeoglu, Ihsan
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2011, 63 (05) : 344 - 349
  • [37] The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel
    Natasha, A. R.
    Ghani, J. A.
    Haron, C. H. Che
    Syarif, J.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017), 2018, 290
  • [38] Fretting wear of multilayered PVD TiAlCN/TiAlN/TiAl on AISI 4140 steel
    Ben Cheikh Larbi, A.
    Tlili, B.
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4): : 1511 - 1518
  • [39] FRETTING WEAR OF NITROGEN-IMPLANTED AISI 304 STAINLESS-STEEL
    HIRVONEN, JP
    MAYER, JW
    MATERIALS LETTERS, 1986, 4 (10) : 404 - 408
  • [40] Rotational fretting wear characteristics of bonded molybdenum disulfide solid lubrication coating
    Zhu, M. (zhuminhao@swjtu.cn), 1600, Chinese Mechanical Engineering Society (48):
12345