DEPENDENCE OF MECHANICAL PROPERTIES ON Cu CONTENT IN AlSi9Cu3(Fe) ALLOY

被引：10

作者：

Voncina, Maja ^{[1
]}

Mocnik, Natasa ^{[1
]}

Nagode, Ales ^{[1
]}

Stoic, Antun ^{[2
]}

Bizjak, Milan ^{[1
]}

机构：

[1] Univ Ljubljana, Fac Nat Sci & Engn, Dept Mat & Met, Askerceva C 12, Ljubljana 1000, Slovenia

[2] JJ Strossmayer Univ Osijek, Mech Engn Fac Slavonski Brod, Trg Ivane Brlic Mazuranic 2, Slavonski Brod 35000, Croatia

来源：

TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2017年 / 24卷

关键词：

Al-Si-Cu alloy; corrosion resistance; mechanical properties; MICROSTRUCTURE; ALUMINUM;

D O I：

10.17559/TV-20140922143741

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

AlSi9Cu3(Fe) aluminium alloy is one of the most commonly used casting aluminium alloys because their utility is based on good mechanical properties. Production often leads to deviations of maximum levels for certain alloying elements, particularly copper. Since mechanical properties of the final products of these alloys strongly depend on the concentration of copper in the alloy, various concentrations of copper were added to the basic alloy whereas the chemical composition was monitored using an optical emission spectrometer, measuring Brinell hardness and doing tensile tests. Moreover, the impacts of copper on oxidizing and corrosion resistance of the experimental alloys were analysed. The alloy with 3 wt. % Cu showed the best results.

引用

页码：229 / 231

页数：3

共 50 条

[31] Microstructure evolution behavior of AlSi9Cu3 alloy during rheocasting
Guo Hong-min
Liu Xu-bo
Yang Xiang-jie
Zhang Ai-sheng
Liu Yong
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S815 - S820
[32] Improved mechanical properties of the high pressure die casting alloy AlSi9Cu3(Fe)(Zn) as a result of the combination of natural and artificial ageing
Pabel, Thomas
Geier, Georg F.
Rockenschaub, Horst
Hopfinger, Michael
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2007, 98 (06) : 516 - 520
[33] Selective laser melting of high-strength primary AlSi9Cu3 alloy: Processability, microstructure, and mechanical properties
Fiocchi, J.
Biffi, C. A.
Tuissi, A.
MATERIALS & DESIGN, 2020, 191
[34] Experimental and Simulation Tests on the Impact of the Conditions of Casting Solidification from AlSi9Cu3 Alloy on their Structure and Mechanical Properties
Hajkowski, J.
Ignaszak, Z.
ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (01) : 167 - 175
[35] Study of AlSi9Cu3 Alloy Crystallization Process with Increased Iron Content at Different Number of Remelts
Matejka, M.
Bolibruchova, D.
Kasinska, J.
Kuris, M.
ARCHIVES OF FOUNDRY ENGINEERING, 2020, 20 (01) : 79 - 83
[36] Influence of Vacuum Support on the Fatigue Life of AlSi9Cu3(Fe) Aluminum Alloy Die Castings
Szalva, Peter
Orbulov, Imre Norbert
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (09) : 5685 - 5695
[37] New milling methodology for sealing planes in AlSi9Cu3(Fe) alloy machined with PCD tool
da Silva, Gilmar Cordeiro
Saraiva, Querlem Martins
Carneiro, Jose Rubens Goncalves
Santos, Izabela Angela
Jose, Anderson Silva
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (11-12): : 3211 - 3223
[38] Application of Natural and Artificial Ageing on Multiply Remelted AlSi9Cu3 Alloy
Matejka, M.
Bolibruchova, D.
ARCHIVES OF FOUNDRY ENGINEERING, 2019, 19 (02) : 60 - 66
[39] New milling methodology for sealing planes in AlSi9Cu3(Fe) alloy machined with PCD tool
Gilmar Cordeiro da Silva
Querlem Martins Saraiva
José Rubens Gonçalves Carneiro
Izabela Ângela Santos
Anderson Silva José
The International Journal of Advanced Manufacturing Technology, 2021, 113 : 3211 - 3223
[40] Influence of Vacuum Support on the Fatigue Life of AlSi9Cu3(Fe) Aluminum Alloy Die Castings
Péter Szalva
Imre Norbert Orbulov
Journal of Materials Engineering and Performance, 2020, 29 : 5685 - 5695

← 1 2 3 4 5 →