DEPENDENCE OF MECHANICAL PROPERTIES ON Cu CONTENT IN AlSi9Cu3(Fe) ALLOY

被引：10

作者：

Voncina, Maja ^{[1
]}

Mocnik, Natasa ^{[1
]}

Nagode, Ales ^{[1
]}

Stoic, Antun ^{[2
]}

Bizjak, Milan ^{[1
]}

机构：

[1] Univ Ljubljana, Fac Nat Sci & Engn, Dept Mat & Met, Askerceva C 12, Ljubljana 1000, Slovenia

[2] JJ Strossmayer Univ Osijek, Mech Engn Fac Slavonski Brod, Trg Ivane Brlic Mazuranic 2, Slavonski Brod 35000, Croatia

来源：

TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2017年 / 24卷

关键词：

Al-Si-Cu alloy; corrosion resistance; mechanical properties; MICROSTRUCTURE; ALUMINUM;

D O I：

10.17559/TV-20140922143741

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

AlSi9Cu3(Fe) aluminium alloy is one of the most commonly used casting aluminium alloys because their utility is based on good mechanical properties. Production often leads to deviations of maximum levels for certain alloying elements, particularly copper. Since mechanical properties of the final products of these alloys strongly depend on the concentration of copper in the alloy, various concentrations of copper were added to the basic alloy whereas the chemical composition was monitored using an optical emission spectrometer, measuring Brinell hardness and doing tensile tests. Moreover, the impacts of copper on oxidizing and corrosion resistance of the experimental alloys were analysed. The alloy with 3 wt. % Cu showed the best results.

引用

页码：229 / 231

页数：3

共 50 条

[11] Relation between mechanical properties and microstructure of cast aluminum alloy AlSi9Cu3
M. Panušková
E. Tillová
M. Chalupová
Strength of Materials, 2008, 40 : 98 - 101
[12] INVESTIGATION OF THE MECHANICAL PROPERTIES OF AlSi9Cu3(Fe)/MWCNT NANOCOMPOSITES PREPARED BY HPDC
Spada, Vedrana
Stanic, Davor
Brnardic, Ivan
MATERIALI IN TEHNOLOGIJE, 2019, 53 (04): : 601 - 606
[13] The Effect of Magnesium and Strontium Over-Alloying on the Mechanical Properties of AlSi9Cu3(Fe) Aluminum Alloy
Szalva, Peter
Orbulov, Imre Norbert
Rick, Tamas
Szalmasi, Istvan
Bukor, Csongor
INTERNATIONAL JOURNAL OF METALCASTING, 2024,
[14] The influence of Cr content on the microstructure and mechanical properties of AlSi9Cu3(Fe) die-casting alloys
Timelli, Giulio
Bonollo, Franco
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (01): : 273 - 282
[15] Prediction of HPDC Casting Properties Made of AlSi9Cu3 Alloy
Hajkowski, Jakub
Popielarski, Pawel
Sika, Robert
ADVANCES IN MANUFACTURING (MANUFACTURING 2017), 2018, : 621 - 631
[16] The Influence of Cooling Rate on Microstructure and Mechanical Properties of AlSi9Cu3
Zbontar, Matic
Petric, Mitja
Mrvar, Primoz
METALS, 2021, 11 (02) : 1 - 13
[17] Effect of Remelting on Microstructure of the AlSi9Cu3 Alloy with Higher Iron Content
Matejka, M.
Bolibruchova, D.
ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (04) : 25 - 30
[18] Effects of Bismuth on the Microstructure and Mechanical Properties of AlSi9Cu3(Fe) Die Casting Alloys
Ferraro, Stefano
Timelli, Giulio
Fabrizi, Alberto
LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 59 - 63
[19] The influence of Sr, Mg and Cu addition on the microstructural properties of a secondary AlSi9Cu3(Fe) die casting alloy
Fabrizi, Alberto
Ferraro, Stefano
Timelli, Giulio
MATERIALS CHARACTERIZATION, 2013, 85 : 13 - 25
[20] Study On Microstructures And Mechanical Properties Of AlSi9Cu3 Aluminum Alloy Fabricated By Liquid Forging
Li, Sheng Li
Sun, Wei Lian
Wang, Hui Qiang
Sun, Bo
MATERIALS PROCESSING TECHNOLOGY, PTS 1-3, 2012, 418-420 : 353 - 356

← 1 2 3 4 5 →