Erosion of gadolinia doped EB-PVD TBCs

被引:36
|
作者
Steenbakker, R. J. L. [1 ]
Wellman, R. G. [1 ]
Nicholls, J. R. [1 ]
机构
[1] Cranfield Univ, Sch Ind & Mfg Sci, Cranfield MK43 0AL, Beds, England
来源
SURFACE & COATINGS TECHNOLOGY | 2006年 / 201卷 / 06期
关键词
erosion; EB-PVD TBC; dopant effects;
D O I
10.1016/j.surfcoat.2006.03.022
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Gadolinia additions have been shown to significantly reduce the thermal conductivity of EB-PVD TBCs. The aim of this paper is to further the understanding on the effects of dopants on the erosion resistance of EB-PVD TBCs by studying the effects of 2 mol% Gd2O3 additions on the room and high temperature erosion resistance of as received and aged EB-PVD TBCs. Previously it has been reported that gadolinia additions increased the erosion rate of EB-PVD TBCs, this is indeed the case for room temperature erosion, however under high temperature (825 degrees C) erosion conditions this is not the case and the doped TBCs have a slightly lower erosion rate than the standard YSZ EB-PVD TBCs. This has been attributed to a change in the erosion mechanisms that operate at the different temperatures. This change in mechanism was not expected under the impact conditions used and has been attributed to a change in the column diameter, and how this influences the dynamics of particle impaction. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:2140 / 2146
页数:7
相关论文
共 50 条
  • [41] Effect of microstructure and temperature on the erosion rates and mechanisms of modified EB PVD TBCs
    Wellman, R. G.
    Nicholls, J. R.
    Murphy, K.
    WEAR, 2009, 267 (11) : 1927 - 1934
  • [42] Microstructural Characterization and Room-Temperature Erosion Behavior of As-Deposited SPS, EB-PVD and APS YSZ-Based TBCs
    Rogerio S. Lima
    Bruno M. H. Guerreiro
    Maniya Aghasibeig
    Journal of Thermal Spray Technology, 2019, 28 : 223 - 232
  • [43] Evaluation of interfacial mechanical properties under shear loading in EB-PVD TBCs by the pushout method
    Kim, Sang-Seok
    Liu, Yu-Fu
    Kagawa, Yutaka
    ACTA MATERIALIA, 2007, 55 (11) : 3771 - 3781
  • [44] The erosion of EB-PVD thermal barrier coatings: The competition between mechanisms
    Fleck, N. A.
    Zisis, Th.
    WEAR, 2010, 268 (11-12) : 1214 - 1224
  • [45] Microstructural Characterization and Room-Temperature Erosion Behavior of As-Deposited SPS, EB-PVD and APS YSZ-Based TBCs
    Lima, Rogerio S.
    Guerreiro, Bruno M. H.
    Aghasibeig, Maniya
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, 28 (1-2) : 223 - 232
  • [46] Failure analysis of EB-PVD LaZrCeO/YSZ TBCs exposed to molten NaCl in thermal cycling
    Liu, Yang
    Xie, Min
    Li, Ruiyi
    Pei, Xun
    Zhang, Yonghe
    Mu, Rende
    Bao, Jinxiao
    Song, Xiwen
    CERAMICS INTERNATIONAL, 2022, 48 (21) : 32444 - 32454
  • [47] Failure behavior study of EB-PVD TBCs under CMAS corrosion and thermal shock cycles
    Luo, Yi
    Zhang, Jiawei
    Dong, Qicai
    Ning, Aimin
    Yu, Yun
    MATERIALS RESEARCH EXPRESS, 2024, 11 (11)
  • [48] Failure characteristics and mechanisms of EB-PVD TBCs with Pt-modified NiAl bond coats
    Zhou, Le
    Mukherjee, Sriparna
    Huang, Ke
    Park, Young Whan
    Sohn, Yongho
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 637 : 98 - 106
  • [49] SENSOR TBCs: REMOTE IN-SITU CONDITION MONITORING OF EB-PVD COATINGS AT ELEVATED TEMPERATURES
    Steenbakker, Remy J. L.
    Wellman, Richard G.
    Nicholls, John R.
    Feist, Joerg P.
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 1, 2008, : 269 - 278
  • [50] Potential influences of bond coat impurities and void growth on premature failure of EB-PVD TBCs
    Haynes, JA
    SCRIPTA MATERIALIA, 2001, 44 (07) : 1147 - 1152