Erosion of gadolinia doped EB-PVD TBCs

被引:36
|
作者
Steenbakker, R. J. L. [1 ]
Wellman, R. G. [1 ]
Nicholls, J. R. [1 ]
机构
[1] Cranfield Univ, Sch Ind & Mfg Sci, Cranfield MK43 0AL, Beds, England
来源
SURFACE & COATINGS TECHNOLOGY | 2006年 / 201卷 / 06期
关键词
erosion; EB-PVD TBC; dopant effects;
D O I
10.1016/j.surfcoat.2006.03.022
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Gadolinia additions have been shown to significantly reduce the thermal conductivity of EB-PVD TBCs. The aim of this paper is to further the understanding on the effects of dopants on the erosion resistance of EB-PVD TBCs by studying the effects of 2 mol% Gd2O3 additions on the room and high temperature erosion resistance of as received and aged EB-PVD TBCs. Previously it has been reported that gadolinia additions increased the erosion rate of EB-PVD TBCs, this is indeed the case for room temperature erosion, however under high temperature (825 degrees C) erosion conditions this is not the case and the doped TBCs have a slightly lower erosion rate than the standard YSZ EB-PVD TBCs. This has been attributed to a change in the erosion mechanisms that operate at the different temperatures. This change in mechanism was not expected under the impact conditions used and has been attributed to a change in the column diameter, and how this influences the dynamics of particle impaction. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:2140 / 2146
页数:7
相关论文
共 50 条
  • [31] Thermal cycling behavior of EB-PVD TBCs on CVD platinum modified aluminide coatings
    Xu, Zhenhua
    Wang, Zhankao
    Huang, Guanghong
    Mu, Rende
    He, Limin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 637 : 226 - 233
  • [33] Influence of porosity on hardness and Young's modulus of nanoporous EB-PVD TBCs by nanoindentation
    Jang, BK
    Matsubara, H
    MATERIALS LETTERS, 2005, 59 (27) : 3462 - 3466
  • [34] Laser Shock Adhesion Test (LASAT) of EB-PVD TBCs: Towards an industrial application
    Begue, G.
    Fabre, G.
    Guipont, V.
    Jeandin, M.
    Bilhe, P.
    Guedou, J. Y.
    Lepoutre, F.
    SURFACE & COATINGS TECHNOLOGY, 2013, 237 : 305 - 312
  • [35] Effect of Obliquely Deposited on Microstructure and Texture Evolution in TBCs Fabricated by EB-PVD Process
    Lei Xingeng
    Wu Hongchen
    Liu Xihua
    Yao Zhenzhong
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 211 - 214
  • [36] Effects of shot peening process on thermal cycling lifetime of TBCs prepared by EB-PVD
    Zhou Zhao-hui
    Gong Sheng-kai
    Li He-fei
    Xu Hui-bin
    Mang Chun-gang
    Wang Lu
    CHINESE JOURNAL OF AERONAUTICS, 2007, 20 (02) : 145 - 147
  • [37] Influence of bondcoat pre-treatment and surface topology on the lifetime of EB-PVD TBCs
    Lau, H
    Leyens, C
    Schulz, U
    Friedrich, C
    SURFACE & COATINGS TECHNOLOGY, 2003, 165 (03): : 217 - 223
  • [38] Effects of Substrate Temperature and Bond Coat Thickness on the Life of TBCs in EB-PVD Process
    Wu Hongchen
    Su Lin
    Lei Xingeng
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 : 148 - 150
  • [39] LaZrCeO/YSZ TBCs by EB-PVD: microstructural evolution, residual stress and degradation behavior
    Shen, Zaoyu
    Zhong, Bintao
    He, Limin
    Xu, Zhenhua
    Mu, Rende
    Huang, Guanghong
    MATERIALS CHEMISTRY FRONTIERS, 2019, 3 (05) : 892 - 900
  • [40] Investigation of failure mechanism of thermal barrier coatings (TBCs) deposited by EB-PVD technique
    Shahid, M. R.
    Abbas, Musharaf
    6TH VACUUM AND SURFACE SCIENCES CONFERENCE OF ASIA AND AUSTRALIA (VASSCAA-6), 2013, 439