Kinetic parameters estimation of MgO-C refractory by shrinking core model

被引:0
|
作者
Hashemi, B.
Nemati, Z. A. [1 ]
Sadrnezhaad, S. K.
Moghimi, Z. A.
机构
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran 113659466, Iran
[2] Shiraz Univ, Sch Engn, Dept Mat Sci, Shiraz, Iran
关键词
modeling; kinetics; MgO-C; oxidation; diffusion coefficient;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Kinetics of oxidation of MgO-C refractories was investigated by shrinking core modeling of the gas-solid reactions taking place during heating the porous materials to the high temperatures. Samples containing 4.5 similar to 17 wt pct graphite were isothermally oxidized at 1000 similar to 1350 degrees C. Weight loss data was compared with predictions of the model. A mixed 2-stage mechanism comprised of pore diffusion plus boundary layer gas transfer was shown to generally control the oxidation rate. Pore diffusion was however more effective, especially at graphite contents lower than 10 wt pct under forced convection blowing of the air. Model calculations showed that effective gas diffusion coefficients were in the range of 0.08 to 0.55 cm(2)/s. These values can be utilized to determine the corresponding tortuosity factors of 6.85 to 2.22. Activation energies related to the pore diffusion mechanism appeared to be around (46.4 +/- 2) kJ/mol. The estimated intermolecular diffusion coefficients were shown to be independent of the graphite content, when the percentage of the graphite exceeded a marginal value of 10.
引用
收藏
页码:826 / 832
页数:7
相关论文
共 50 条
  • [31] In-situ formation of spinel fibers in MgO-C refractory matrixes
    Xie Zhaohui
    Ye Fangbao
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2009, 24 (06): : 896 - 902
  • [32] Effect of Al and alumina additions on oxidation rate of MgO-C refractory
    Faghihi-Sani, MA
    Yamaguchi, A
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2002, 110 (08) : 699 - 702
  • [33] SPECIFICATION OF MgO-CONCENTRATE OBTAINED FROM POST MORTEM MgO-C REFRACTORY MATERIALS
    Plesingerova, Beatrice
    Vadasz, Pavol
    Sucik, Gabriel
    Olejar, Igor
    CERAMICS-SILIKATY, 2018, 62 (04) : 389 - 395
  • [34] Recycling MgO-C refractory in the EAF of Mittal Steel Lázaro Cárdenas
    Gonzalez, R. C. Lule
    Acosta, F. Lopéz
    Tapia, R. Rodriguez
    Nava, A. N. Conejo
    Iron and Steel Technology, 2006, 3 (02): : 76 - 84
  • [35] Quantitative Evaluation of Slag Corrosion on MgO-C Refractory by Experimental and Numerical Simulation
    Qiang Wang
    Fangguan Tan
    Zhu He
    Guangqiang Li
    Jianli Li
    JOM, 2021, 73 : 2709 - 2714
  • [36] Corrosion resistance of MgO-C refractory to smelting reduction slag containing titania
    Liu, Q.-C. (liuqi@umr.edu), 1600, IOM Communications Ltd. (37):
  • [37] Corrosion mechanism and kinetic behaviour of MgO-C refractory material in contact with CaO-Al2O3-SiO2-MgO slag
    Jansson, S
    Brabie, V
    Jönsson, P
    SCANDINAVIAN JOURNAL OF METALLURGY, 2005, 34 (05) : 283 - 292
  • [38] Corrosion resistance of MgO-C refractory to smelting reduction slag containing titania
    Liu, QC
    Chen, DF
    Xu, Y
    Newkirk, JW
    BRITISH CORROSION JOURNAL, 2002, 37 (03): : 231 - 234
  • [39] Effect of carbon content of ferromanganese alloy on corrosion behaviour of MgO-C refractory
    Um, H.
    Lee, K.
    Kim, K. -Y.
    Shin, G.
    Chung, Y.
    IRONMAKING & STEELMAKING, 2014, 41 (01) : 31 - 37
  • [40] Study on low carbon containing MgO-C refractory: Use of nano carbon
    Bag, Mousom
    Adak, Sukumar
    Sarkar, Ritwik
    CERAMICS INTERNATIONAL, 2012, 38 (03) : 2339 - 2346