Kinetic parameters estimation of MgO-C refractory by shrinking core model

被引:0
|
作者
Hashemi, B.
Nemati, Z. A. [1 ]
Sadrnezhaad, S. K.
Moghimi, Z. A.
机构
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran 113659466, Iran
[2] Shiraz Univ, Sch Engn, Dept Mat Sci, Shiraz, Iran
关键词
modeling; kinetics; MgO-C; oxidation; diffusion coefficient;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Kinetics of oxidation of MgO-C refractories was investigated by shrinking core modeling of the gas-solid reactions taking place during heating the porous materials to the high temperatures. Samples containing 4.5 similar to 17 wt pct graphite were isothermally oxidized at 1000 similar to 1350 degrees C. Weight loss data was compared with predictions of the model. A mixed 2-stage mechanism comprised of pore diffusion plus boundary layer gas transfer was shown to generally control the oxidation rate. Pore diffusion was however more effective, especially at graphite contents lower than 10 wt pct under forced convection blowing of the air. Model calculations showed that effective gas diffusion coefficients were in the range of 0.08 to 0.55 cm(2)/s. These values can be utilized to determine the corresponding tortuosity factors of 6.85 to 2.22. Activation energies related to the pore diffusion mechanism appeared to be around (46.4 +/- 2) kJ/mol. The estimated intermolecular diffusion coefficients were shown to be independent of the graphite content, when the percentage of the graphite exceeded a marginal value of 10.
引用
收藏
页码:826 / 832
页数:7
相关论文
共 50 条
  • [21] Wetting, spreading and corrosion behavior of molten slag on dense MgO and MgO-C refractory
    Liu, Zhaoyang
    Yuan, Lei
    Jin, Endong
    Yang, Xin
    Yu, Jingkun
    CERAMICS INTERNATIONAL, 2019, 45 (01) : 718 - 724
  • [22] In-situ Formation of Spinel Fibers in MgO-C Refractory Matrixes
    谢朝晖
    Journal of Wuhan University of Technology(Materials Science), 2009, (06) : 896 - 902
  • [23] Corrosion Resistance of MgO-C Based Refractory to Slag Containing Titania
    LIU Qing-cai
    SUN Ya-li
    DU Yun-gui
    CHEN Deng-fu
    JournalofIronandSteelResearch(International), 2004, 11 (01) : 1 - 4
  • [24] Quantifying of a dynamic refractory wear test setup for MgO-C products
    Erprobung eines dynamischen Verschleißtestes für MgO-C Produkte
    Goriupp, Jürgen (juergen.goriupp@unileoben.ac.at), 1600, Springer (157): : 8 - 9
  • [25] Effect of Fe addition on the microstructure and oxidation behavior of MgO-C refractory
    Gao, Song
    Xu, Lei
    Chen, Min
    Wang, Nan
    MATERIALS CHEMISTRY AND PHYSICS, 2019, 238
  • [26] Corrosion resistance of MgO-C based refractory to slag containing Titania
    Liu, QC
    Sun, YL
    Du, YG
    Chen, DF
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2004, 11 (01) : 1 - 4
  • [27] In-situ formation of spinel fibers in MgO-C refractory matrixes
    Zhaohui Xie
    Fangbao Ye
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2009, 24 : 896 - 902
  • [28] Nano carbon containing MgO-C refractory: Effect of graphite content
    Bag, Mousom
    Adak, Sukumar
    Sarkar, Ritwik
    CERAMICS INTERNATIONAL, 2012, 38 (06) : 4909 - 4914
  • [29] Effect of al antioxidant on the rate of oxidation of carbon in MgO-C refractory
    Sadrnezhaad, S. K.
    Nemati, Z. A.
    Mahshid, S.
    Hosseini, S.
    Hashemi, B.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (02) : 509 - 515
  • [30] MgO-C refractories based on refractory recyclates and environmentally friendly binders
    Stadtmueller, Till M. J.
    Storti, Enrico
    Brachhold, Nora
    Lauermannova, Anna-Marie
    Jankovsky, Ondrej
    Schemmel, Thomas
    Hubalkova, Jana
    Gehre, Patrick
    Aneziris, Christos G.
    OPEN CERAMICS, 2023, 16