High temperature properties of modified bituminous binders produced in Poland

被引：2

作者：

Radziszewski, Piotr ^{[1
]}

Sarnowski, Michal ^{[1
]}

Pokorski, Piotr ^{[1
]}

Kowalski, Karol J. ^{[1
]}

Krol, Jan ^{[1
]}

机构：

[1] Warsaw Univ Technol, Ul Lecha Kaczynskiego 16, PL-00637 Warsaw, Poland

来源：

64THSCIENTIFIC CONFERENCE OF THE COMMITTEE FOR CIVIL ENGINEERING OF THE POLISH ACADEMY OF SCIENCES AND THE SCIENCE COMMITTEE OF THE POLISH ASSOCIATION OF CIVIL ENGINEERS (PZITB) (KRYNICA 2018) | 2019年 / 262卷

关键词：

CREEP RECOVERY MSCR; PERFORMANCE;

D O I：

10.1051/matecconf/201926205011

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Bitumen used for the construction of road pavements should exhibit adequate resistance to loads at high operating temperatures. An effective method of improving the properties of bitumen is their modification. To evaluate the high-temperature properties of bitumen, standard consistency tests and advanced rheological tests under dynamic load are conducted. The main purpose of the article is to assess the high temperature properties of modified binders produced by two major Polish producers. The assessment was based on the tests results of modified binders in the range of the standard softening point temperature test and tests in the dynamic shear rheometer (DSR) according to the requirements of Strategic Highway Research Program (SHRP) and Multiple Stress Creep Recovery Test (MSCR). It has been shown that due to the highest operating temperatures of road pavements in Poland, produced bituminous binders meet the requirements of resistance to permanent deformation with a great reserve.

引用

页数：6

共 50 条

[31] Investigating the High- and Low-Temperature Performance of Warm Crumb Rubber-Modified Bituminous Binders Using Rheological Tests
Wang, Haopeng
Liu, Xueyan
Apostolidis, Panos
Wang, Di
Leng, Zhen
Lu, Guoyang
Erkens, Sandra
Skarpas, Athanasios
JOURNAL OF TRANSPORTATION ENGINEERING PART B-PAVEMENTS, 2021, 147 (04)
[32] Influence of properties of bituminous binders on the strength of formed coke
Sharma, AK
Das, BP
Tripathi, PSM
FUEL PROCESSING TECHNOLOGY, 2002, 75 (03) : 201 - 214
[33] High-temperature properties of composite modified light-colored synthetic asphalt binders
Zhang, Heng Cong
Wu, Jianmin
Luo, Yin
Qin, Zhong
MATERIALS RESEARCH EXPRESS, 2021, 8 (06)
[34] Modelling the linear viscoelastic rheological properties of bituminous binders
Yusoff, Nur Izzi Md.
Shaw, Montgomery T.
Airey, Gordon D.
CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (05) : 2171 - 2189
[35] Fatigue properties of bituminous binders reinforced with carbon nanotubes
Santagata, Ezio
Baglieri, Orazio
Tsantilis, Lucia
Chiappinelli, Giuseppe
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2015, 16 (01) : 80 - 90
[36] Nano-scale properties of warm-modified bituminous binders determined with atomic force microscopy
Abd, Duraid M.
Al-Khalid, Hussain
Akhtar, Riaz
ROAD MATERIALS AND PAVEMENT DESIGN, 2017, 18 : 189 - 202
[37] Influence of Evotherm on the thermal equilibrium time of unmodified and modified bituminous binders
Tirumali, Arjun Kumar
Arjun, P., V
Mubashirhussain, Syed
Vishnu, R.
Chowdary, Venkaiah
Asif, K. Ahmed
AUSTRALIAN JOURNAL OF CIVIL ENGINEERING, 2024, 22 (01) : 13 - 22
[38] Experimental Investigation on the Fatigue Damage Behaviour of Modified Bituminous Binders and Mastics
Santagata, Ezio
Baglieri, Orazio
Dalmazzo, Davide
2008 JOURNAL OF THE ASSOCIATION OF ASPHALT PAVING TECHNOLOGISTS, VOL 77, 2008, 77 : 851 - +
[39] A comprehensive study on adhesion between modified bituminous binders and mineral aggregates
Valentin, J.
Trejbal, J.
Nezerka, V
Valentova, T.
Vackova, P.
Ticha, P.
CONSTRUCTION AND BUILDING MATERIALS, 2021, 305 (305)
[40] Evaluation of swelling and degradation rates in crumb rubber modified bituminous binders
Santagata, Ezio
Lanotte, Michele
Baglieri, Orazio
CONSTRUCTION AND BUILDING MATERIALS, 2025, 458

← 1 2 3 4 5 →