High temperature properties of modified bituminous binders produced in Poland

被引：2

作者：

Radziszewski, Piotr ^{[1
]}

Sarnowski, Michal ^{[1
]}

Pokorski, Piotr ^{[1
]}

Kowalski, Karol J. ^{[1
]}

Krol, Jan ^{[1
]}

机构：

[1] Warsaw Univ Technol, Ul Lecha Kaczynskiego 16, PL-00637 Warsaw, Poland

来源：

64THSCIENTIFIC CONFERENCE OF THE COMMITTEE FOR CIVIL ENGINEERING OF THE POLISH ACADEMY OF SCIENCES AND THE SCIENCE COMMITTEE OF THE POLISH ASSOCIATION OF CIVIL ENGINEERS (PZITB) (KRYNICA 2018) | 2019年 / 262卷

关键词：

CREEP RECOVERY MSCR; PERFORMANCE;

D O I：

10.1051/matecconf/201926205011

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Bitumen used for the construction of road pavements should exhibit adequate resistance to loads at high operating temperatures. An effective method of improving the properties of bitumen is their modification. To evaluate the high-temperature properties of bitumen, standard consistency tests and advanced rheological tests under dynamic load are conducted. The main purpose of the article is to assess the high temperature properties of modified binders produced by two major Polish producers. The assessment was based on the tests results of modified binders in the range of the standard softening point temperature test and tests in the dynamic shear rheometer (DSR) according to the requirements of Strategic Highway Research Program (SHRP) and Multiple Stress Creep Recovery Test (MSCR). It has been shown that due to the highest operating temperatures of road pavements in Poland, produced bituminous binders meet the requirements of resistance to permanent deformation with a great reserve.

引用

页数：6

共 50 条

[21] The effect of polymer modified binders on the long-term performance of bituminous mixtures: The influence of temperature
Moreno-Navarro, F.
Sol-Sanchez, M.
Rubio-Gamez, M. C.
MATERIALS & DESIGN, 2015, 78 : 5 - 11
[22] Properties of Bituminous Binders Exposed to Ageing Process
Remisova, Eva
Holy, Michal
3RD WORLD MULTIDISCIPLINARY CIVIL ENGINEERING, ARCHITECTURE, URBAN PLANNING SYMPOSIUM (WMCAUS 2018), 2019, 471
[23] Influence of waxes on adhesion properties of bituminous binders
Lamperti, Riccardo
Grenfell, James
Sangiorgi, Cesare
Lantieri, Claudio
Airey, Gordon D.
CONSTRUCTION AND BUILDING MATERIALS, 2015, 76 : 404 - 412
[24] Investigation of temperature sensitivity and storage stability of polyethylene and calcium carbonate compound modified bituminous binders
Erkus, Yunus
Kok, Baha Vural
Yilmaz, Mehmet
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2022, 28 (06): : 818 - 827
[25] DETERMINING THE HIGH TEMPERATURE PERFORMANCE GRADE AND WORKABILITY OF STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS BINDERS ACCORDING TO SUPERPAVE SYSTEM
Yilmaz, Mehmet
Kok, Baha Vural
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2008, 23 (04): : 811 - 819
[26] High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers
Xu, Ouming
Xiao, Feipeng
Han, Sen
Amirkhanian, Serji N.
Wang, Zhenjun
CONSTRUCTION AND BUILDING MATERIALS, 2016, 112 : 49 - 58
[27] Experimental evaluation on high temperature rheological properties of various fiber modified asphalt binders
Chen Zheng
Wu Shao-peng
Zhu Zu-huang
Liu Jie-sheng
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2008, 15 (Suppl 1): : 135 - 139
[28] Experimental evaluation on high temperature rheological properties of various fiber modified asphalt binders
Zheng Chen
Shao-peng Wu
Zu-huang Zhu
Jie-sheng Liu
Journal of Central South University of Technology, 2008, 15 : 135 - 139
[29] Hot Mixture Performances of Bituminous Binders Modified with Soybean Oil
Saltan, Mehmet
Kacaroglu, Gizem
Karadag, Oznur
ADVANCES IN CIVIL ENGINEERING MATERIALS, 2020, 9 (01): : 427 - 443
[30] Effects of the manufacturing process on the performances of the bituminous binders modified with EVA
Haddadi, Smail
Ghorbel, Elhem
Laradi, Nadir
CONSTRUCTION AND BUILDING MATERIALS, 2008, 22 (06) : 1212 - 1219

← 1 2 3 4 5 →