Optimization of Microchannel Heat Sinks Using Entropy Generation Minimization Method

被引：51
|
作者：
Khan, Waqar Ahmed [1 ]
Culham, J. Richard [2 ]
Yovanovich, M. Michael [2 ]
机构：
[1] Natl Univ Sci & Technol, PN Engn Coll, Dept Engn Sci, PNS Jauhar, Karachi 75350, Pakistan
[2] Univ Waterloo, Dept Mech Engn, Microelect Heat Transfer Lab, Waterloo, ON N2L 3G1, Canada
来源：
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES | 2009年 / 32卷 / 02期
基金：
加拿大自然科学与工程研究理事会;
关键词：
Analytical model; entropy generation minimization; microchannel heat sinks; optimization; SINGLE-PHASE FLOW; THERMAL PERFORMANCE; OPTIMAL-DESIGN; FABRICATION;
D O I：
10.1109/TCAPT.2009.2022586
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, an entropy generation minimization (EGM) procedure is employed to optimize the overall performance of microchannel heat sinks. This allows the combined effects of thermal resistance and pressure drop to be assessed simultaneously as the heat sink interacts with the surrounding flow field. New general expressions for the entropy generation rate are developed by considering an appropriate control volume and applying mass, energy, and entropy balances. The effect of channel aspect ratio, fin spacing ratio, heat sink material, Knudsen numbers, and accommodation coefficients on the entropy generation rate is investigated in the slip flow region. Analytical/empirical correlations are used for heat transfer and friction coefficients, where the characteristic length is used as the hydraulic diameter of the channel. A parametric study is also performed to show the effects of different design variables on the overall performance of microchannel heat sinks.
引用
收藏
页码：243 / 251
页数：9
相关论文
共 50 条
  • [41] Analysis and optimization of the thermal performance of microchannel heat sinks
    Liu, D
    Garimella, SV
    ADVANCES IN ELECTRONIC PACKAGING 2003, VOL 2, 2003, : 557 - 565
  • [42] Influence of moist air in copper heat sinks: Analysis through the entropy generation minimization criterion
    Cruz, J.
    Amaya, I.
    Correa, R.
    INGENIERIA E INVESTIGACION, 2015, 35 (03): : 44 - 52
  • [43] Analysis and optimization of the thermal performance of microchannel heat sinks
    Liu, D
    Garimella, SV
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2005, 15 (01) : 7 - 26
  • [44] Optimization Under Uncertainty of Manifold Microchannel Heat Sinks
    Sarangi, Suchismita
    Bodla, Karthik K.
    Garimella, Suresh V.
    Murthy, Jayathi Y.
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 9, PTS A AND B, 2013, : 1141 - 1153
  • [45] Topology optimization of microchannel heat sinks using a two-layer model
    Yan, Suna
    Wang, Fengwen
    Hong, Jun
    Sigmund, Ole
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 143
  • [46] Optimization of a magnetohydrodynamic flow based on the entropy generation minimization method
    Ibáñez, G
    Cuevas, S
    de Haro, MU
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2006, 33 (03) : 295 - 301
  • [47] Optimization of counterflow heat exchanger geometry through minimization of entropy generation
    Lerou, PPPM
    Veenstra, TT
    Burger, JF
    ter Brake, HJM
    Rogalla, H
    CRYOGENICS, 2005, 45 (10-11) : 659 - 669
  • [48] Thermal performance and entropy generation of novel X-structured double layered microchannel heat sinks
    Shen, Han
    Xie, Gongnan
    Wang, Chi-Chuan
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2020, 111 : 90 - 104
  • [49] Effects of staggered truncated ribs on thermal-hydraulic performance and entropy generation of microchannel heat sinks
    Wang, Dongkai
    Xue, Lirui
    Liu, Chang
    Chen, Haitao
    Xia, Changquan
    Qian, Qinyu
    Cheng, Liwen
    CASE STUDIES IN THERMAL ENGINEERING, 2025, 65
  • [50] Optimization of Double Pipe Fin-pin Heat Exchanger using Entropy Generation Minimization
    Taghilou, M.
    Ghadimi, B.
    Seyyedvalilu, M. H.
    INTERNATIONAL JOURNAL OF ENGINEERING, 2014, 27 (09): : 1431 - 1438
12345