Optimization of Microchannel Heat Sinks Using Entropy Generation Minimization Method

被引：51

作者：

Khan, Waqar Ahmed ^{[1
]}

Culham, J. Richard ^{[2
]}

Yovanovich, M. Michael ^{[2
]}

机构：

[1] Natl Univ Sci & Technol, PN Engn Coll, Dept Engn Sci, PNS Jauhar, Karachi 75350, Pakistan

[2] Univ Waterloo, Dept Mech Engn, Microelect Heat Transfer Lab, Waterloo, ON N2L 3G1, Canada

来源：

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES | 2009年 / 32卷 / 02期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Analytical model; entropy generation minimization; microchannel heat sinks; optimization; SINGLE-PHASE FLOW; THERMAL PERFORMANCE; OPTIMAL-DESIGN; FABRICATION;

D O I：

10.1109/TCAPT.2009.2022586

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, an entropy generation minimization (EGM) procedure is employed to optimize the overall performance of microchannel heat sinks. This allows the combined effects of thermal resistance and pressure drop to be assessed simultaneously as the heat sink interacts with the surrounding flow field. New general expressions for the entropy generation rate are developed by considering an appropriate control volume and applying mass, energy, and entropy balances. The effect of channel aspect ratio, fin spacing ratio, heat sink material, Knudsen numbers, and accommodation coefficients on the entropy generation rate is investigated in the slip flow region. Analytical/empirical correlations are used for heat transfer and friction coefficients, where the characteristic length is used as the hydraulic diameter of the channel. A parametric study is also performed to show the effects of different design variables on the overall performance of microchannel heat sinks.

引用

页码：243 / 251

页数：9

共 50 条

[21] Optimization of triangular microchannel heat sinks using constructal theory
Moloud Mardani
Mohammad Reza Salimpour
Journal of Mechanical Science and Technology, 2016, 30 : 4757 - 4764
[22] Studying the performance of solid/perforated pin-fin heat sinks using entropy generation minimization
Mohamed L. Elsayed
Osama Mesalhy
Heat and Mass Transfer, 2015, 51 : 691 - 702
[23] Studying the performance of solid/perforated pin-fin heat sinks using entropy generation minimization
Elsayed, Mohamed L.
Mesalhy, Osama
HEAT AND MASS TRANSFER, 2015, 51 (05) : 691 - 702
[24] Viscous Dissipation Effect on Streamwise Entropy Generation of Nanofluid Flow in Microchannel Heat Sinks
Ting, Tiew Wei
Hung, Yew Mun
Guo, Ningqun
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (05):
[25] Topology Optimization of Manifold Microchannel Heat Sinks
Zhou, Yuqing
Nomura, Tsuyoshi
Dede, Ercan M.
PROCEEDINGS OF THE NINETEENTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2020), 2020, : 740 - 746
[26] Methods for thermal optimization of microchannel heat sinks
Kim, SJ
HEAT TRANSFER ENGINEERING, 2004, 25 (01) : 37 - 49
[27] Robust optimization design for microchannel heat sinks
School of Information and Control Engineering, Southwest University of Science and Technology, Mianyang 621002, China
Xitong Fangzhen Xuebao, 2006, 9 (2630-2633+2637):
[28] Method of entropy generation minimization, or modeling and optimization based on combined heat transfer and thermodynamics
Bejan, A
REVUE GENERALE DE THERMIQUE, 1996, 35 (418-19): : 637 - 646
[29] Constructal entropy generation rate minimization for cylindrical pin-fin heat sinks
Chen, Lingen
Yang, Aibo
Xie, Zhihui
Sun, Fengrui
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2017, 111 : 168 - 174
[30] Enhancing heat transfer efficiency and entropy generation minimization in Micro-Channel Heat Sinks through pillar spacing and diameter optimization
Sakkay, Mosab
El Ghandouri, Ihssane
El Maakoul, Anas
Saadeddine, Said
Meziane, Mohamed
Dani, Adil
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2024, 108

← 1 2 3 4 5 →