Experimental observations about the influence of the cutting conditions in high speed machining of Ti-6Al-4V titanium alloy

被引：0
|
作者：
Castro, L. [1 ]
Vieville, P.
Lipinski, P.
机构：
[1] ENIM, F-57045 Metz 1, France
[2] LPMM, F-57045 Metz, France
[3] LFM, F-57045 Metz 1, France
来源：
JOURNAL DE PHYSIQUE IV | 2006年 / 134卷
关键词：
D O I：
10.1051/jp4:2006134193
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
This work presents experimental observations about the influence of the cutting conditions on orthogonal high speed turning in presence of instabilities. Specially, the influences of the machine tool dynamic characteristics, modified by changes of the tool-holder's length, are examined. Following this, in order to excite the system during machining, the cutting conditions were chosen for assuring chatter and segmented chip apparition. The machining tests were carried out on Ti-6Al-4V Titanium alloy samples, using a L-8 fractional Taguchi experiment. This method permitted to identify and compare the cutting conditions' effects on the machining process, minimizing the number of tests.
引用
收藏
页码：1273 / 1278
页数：6
相关论文
共 50 条
  • [41] A PRELIMINARY STUDY OF MACHINING CHARACTERISTICS OF LENS TITANIUM ALLOY (TI-6AL-4V)
    Polishetty, Ashwin
    Littlefair, Guy
    PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 3, 2023,
  • [42] MICRO WIRE ELECTRICAL DISCHARGE MACHINING OF TITANIUM ALLOY Ti-6Al-4V
    Kopytowski, Adrian
    Oniszczuk-Swiercz, Dorota
    Swiercz, Rafal
    Nowicki, Rafal
    Chmielewski, Tomasz
    Salacinski, Tadeusz
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 1560 - 1565
  • [43] High Speed Infrared Measurement of the Cutting Temperature during Milling of Titanium Ti-6Al-4V
    Obermair, Franz
    Feichtenschlager, Hans-Peter
    2022 IEEE 13TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT 2022), 2022, : 196 - 201
  • [44] The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V
    Zhang, Chen
    Zou, Dongyi
    Mazur, Maciej
    Mo, John P. T.
    Li, Guangxian
    Ding, Songlin
    MATERIALS, 2023, 16 (07)
  • [45] Effect of cutting parameters on machining surface and cutting tool in milling of Ti-6Al-4V alloy
    Celik, Yahya Hisman
    Karabiyik, Ahmet
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2016, 23 (05) : 349 - 356
  • [46] Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V
    Anhai Li
    Jun Zhao
    Yonghui Zhou
    Xiaoxiao Chen
    Dong Wang
    The International Journal of Advanced Manufacturing Technology, 2012, 62 : 933 - 942
  • [47] Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V
    Li, Anhai
    Zhao, Jun
    Zhou, Yonghui
    Chen, Xiaoxiao
    Wang, Dong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 62 (9-12): : 933 - 942
  • [48] High speed turning of Ti6Al4V alloy in micro cutting conditions
    Aslantas, K.
    Cicek, A.
    8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 58 - 61
  • [49] Turning characteristics of titanium alloy Ti-6Al-4V with high-pressure cutting fluid
    Hosokawa, Akira
    Kosugi, Koki
    Ueda, Takashi
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2022, 71 (01) : 81 - 84
  • [50] Effect of traverse speed on abrasive waterjet machining of Ti-6Al-4V alloy
    Hascalik, Ahmet
    Caydas, Ulas
    Gurun, Hakan
    MATERIALS & DESIGN, 2007, 28 (06) : 1953 - 1957
12345