Experimental observations about the influence of the cutting conditions in high speed machining of Ti-6Al-4V titanium alloy

被引：0
|
作者：
Castro, L. [1 ]
Vieville, P.
Lipinski, P.
机构：
[1] ENIM, F-57045 Metz 1, France
[2] LPMM, F-57045 Metz, France
[3] LFM, F-57045 Metz 1, France
来源：
JOURNAL DE PHYSIQUE IV | 2006年 / 134卷
关键词：
D O I：
10.1051/jp4:2006134193
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
This work presents experimental observations about the influence of the cutting conditions on orthogonal high speed turning in presence of instabilities. Specially, the influences of the machine tool dynamic characteristics, modified by changes of the tool-holder's length, are examined. Following this, in order to excite the system during machining, the cutting conditions were chosen for assuring chatter and segmented chip apparition. The machining tests were carried out on Ti-6Al-4V Titanium alloy samples, using a L-8 fractional Taguchi experiment. This method permitted to identify and compare the cutting conditions' effects on the machining process, minimizing the number of tests.
引用
收藏
页码：1273 / 1278
页数：6
相关论文
共 50 条
  • [31] The Effects of Cutting Parameters to the Surface Roughness in Low Speed Machining of Micro-milling of Titanium Alloy Ti-6Al-4V
    Kiswanto, Gandjar
    Mandala, A.
    Azmi, M.
    Ko, T. J.
    3RD INTERNATIONAL CONFERENCE ON MATERIALS AND INTELLIGENT MANUFACTURING (ICMIM), 2019, 654
  • [32] Impact of Dry and Cryogenic Cutting Medium on Shear Angle and Chip Morphology in High-speed Machining of Titanium Alloy (Ti-6Al-4V)
    Hassan, Adeel
    Khan, Muhammad Ali
    Younas, Muhammad
    Jaffery, Syed Huasin Imran
    Khan, Mushtaq
    Ahmed, Naveed
    Awang, Mokhtar
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2024, 21 (02) : 11316 - 11331
  • [33] Influence of Modified Cutting Inserts in Machining of Ti-6Al-4V Alloy Using PCD Insert
    Rao, Charitha M.
    Rao, Shrikantha S.
    Herbert, Mervin A.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 18426 - 18432
  • [34] Effect of Cutting Fluid on Micromilling of Ti-6Al-4V Titanium Alloy
    Ziberov, Maksym
    da Silva, Marcio Bacci
    Jackson, Mark
    Hung, Wayne N. P.
    44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, 2016, 5 : 332 - 347
  • [35] Numerical Study of Laser Cutting of Titanium Alloy (TI-6Al-4V)
    Mittal, Vipin
    Sharma, Pawan
    Patel, Vijay Kr
    Pandey, Vikas
    Kumar, Vinod
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 579 - 583
  • [36] Cutting Force and Surface Finish Analysis of Machining Additive Manufactured Titanium Alloy Ti-6Al-4V
    Polishetty, Ashwin
    Shunmugavel, Manikanda
    Goldberg, Moshe
    Littlefair, Guy
    Singh, Raj Kumar
    INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017), 2016, 7 : 284 - 289
  • [37] Surface integrity in high speed end milling of titanium alloy Ti-6Al-4V
    Daymi, A.
    Boujelbene, M.
    Ben Amara, A.
    Bayraktar, E.
    Katundi, D.
    MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (01) : 387 - 394
  • [38] Simulation of The High-speed Milling Temperature of Titanium Alloy Ti-6Al-4V
    Huang, Xinchun
    Yao, Changfeng
    Zhang, Dinghua
    Ren, Junxue
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1171 - 1175
  • [39] An Experimental and Numerical Study on Orthogonal Machining of Ti-6Al-4V Alloy
    Krishnaraj, Vijayan
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2016, 16 (04) : 209 - 213
  • [40] Powder Mixed Electrical Discharge Machining of Titanium Alloy (Ti-6Al-4V)
    Tang, Lin
    Guo, Yongfeng
    Wang, Muxi
    Hou, Pengju
    Ma, Xinlei
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1621 - 1623
12345