Ductile iron castings fabricated using metallic moulds

被引：3
|
作者：
Urrestarazu, A. [1 ]
Sertucha, J. [2 ]
Suarez, R. [2 ]
Alvarez-Ilzarbe, I. [3 ]
机构：
[1] Greyco SLU, E-39409 San Felices De Buelna, Cantabria, Spain
[2] Ctr Invest Met AZTERLAN, E-48200 Durango, Bizkaia, Spain
[3] Frenos Iruna SAL, E-31191 Barbatain, Navarra, Spain
来源：
REVISTA DE METALURGIA | 2013年 / 49卷 / 05期
关键词：
Ductile iron; Metallic moulds; Structural characteristics; Mechanical properties; MECHANICAL-PROPERTIES; EUTECTOID TRANSFORMATION;
D O I：
10.3989/revmetalm.1253
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The features and suitability of high requirements ductile iron castings production using metallic moulds have been studied in the present work. The structural and mechanical properties of the produced castings have been analysed and compared to the corresponding ones but fabricated using green sand moulds according to a conventional production process. The higher cooling rate in the metallic moulds is the main cause for the appearance of the detected structural changes in castings. The mechanical and microstructural properties obtained directly on castings are remarkable due to the higher nodule count among other factors. Finally, the benefits and inconveniences found in this kind of production methodology using metallic moulds are also discussed.
引用
收藏
页码：325 / 339
页数：15
相关论文
共 50 条
  • [31] Elimination of Shrinkage in Ductile Iron Castings Using Computer Simulation of Casting and Solidification
    Futas, Peter
    Pribulova, Alena
    Sabik, Vladimir
    Petrik, Jozef
    Blasko, Peter
    Brzezinski, Marcin
    PROCESSES, 2024, 12 (03)
  • [32] Graphite degeneration in surface layer of ductile iron castings
    Ivan, N.
    Chisamera, M.
    Riposan, I.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2013, 26 (03) : 138 - 142
  • [33] Graphite degeneration in surface layer of ductile iron castings
    POLITEHNICA University of Bucharest, 313 Spl. Independentei, RO-060042, Bucharest, Romania
    Riposan, I. (riposan@foundry.pub.ro), 1600, Maney Publishing (26):
  • [34] Effect of melting techniques on ductile iron castings properties
    Kaunas University of Technology, Kaunas, Lithuania
    不详
    Metalurgija, 2006, 1 (13-16):
  • [35] Inhomogeneous Pearlite and Ferrite in Ductile Iron Sand Castings
    R. N. Lumley
    International Journal of Metalcasting, 2023, 17 : 1467 - 1492
  • [36] PRODUCTION OF DUCTILE IRON CASTINGS WITHOUT RISER.
    Nakano, Toshio
    1600, (05):
  • [37] Production of Ductile Iron Castings with Different Matrix Structure
    Bockus, Stasys
    Zaldarys, Gintautas
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2010, 16 (04): : 307 - 310
  • [38] Effect of melting techniques on ductile iron castings properties
    Bockus, S
    Dobrovolskis, A
    METALURGIJA, 2006, 45 (01): : 13 - 16
  • [39] Ductile iron castings production by directional solidification method
    Bevza, V.F.
    Maz'ko, V.S.
    Fushe Yanjiu yu Fushe Gongyi Xuebao/Journal of Radiation Research and Radiation Processing, 1998, 16 (04): : 33 - 34
  • [40] Thin Wall Ductile Iron Castings: Technological Aspects
    Fras, E.
    Gorny, M.
    Kapturkiewicz, W.
    ARCHIVES OF FOUNDRY ENGINEERING, 2013, 13 (01) : 23 - 28
12345