Ductile iron castings fabricated using metallic moulds

被引：3

作者：

Urrestarazu, A. ^{[1
]}

Sertucha, J. ^{[2
]}

Suarez, R. ^{[2
]}

Alvarez-Ilzarbe, I. ^{[3
]}

机构：

[1] Greyco SLU, E-39409 San Felices De Buelna, Cantabria, Spain

[2] Ctr Invest Met AZTERLAN, E-48200 Durango, Bizkaia, Spain

[3] Frenos Iruna SAL, E-31191 Barbatain, Navarra, Spain

来源：

REVISTA DE METALURGIA | 2013年 / 49卷 / 05期

关键词：

Ductile iron; Metallic moulds; Structural characteristics; Mechanical properties; MECHANICAL-PROPERTIES; EUTECTOID TRANSFORMATION;

D O I：

10.3989/revmetalm.1253

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The features and suitability of high requirements ductile iron castings production using metallic moulds have been studied in the present work. The structural and mechanical properties of the produced castings have been analysed and compared to the corresponding ones but fabricated using green sand moulds according to a conventional production process. The higher cooling rate in the metallic moulds is the main cause for the appearance of the detected structural changes in castings. The mechanical and microstructural properties obtained directly on castings are remarkable due to the higher nodule count among other factors. Finally, the benefits and inconveniences found in this kind of production methodology using metallic moulds are also discussed.

引用

页码：325 / 339

页数：15

共 50 条

[21] CONVERTS IRON FOR SMALL DUCTILE CASTINGS.
Huskonen, Wallace D.
Foundry Management and Technology, 1974, 102 (09): : 74 - 76
[22] Thin wall ductile iron castings as substitutes for aluminium alloy castings
1600, Committee of Metallurgy (59):
[23] Converting steel weldments to ductile iron castings
Hathaway, Robert M.
Modern Casting, 1995, 85 (03) : 26 - 30
[24] The outlook for increasing ductile iron castings production
Kozlov, L.Y.
Fushe Yanjiu yu Fushe Gongyi Xuebao/Journal of Radiation Research and Radiation Processing, 1998, 16 (04): : 5 - 7
[25] THIN WALL DUCTILE IRON CASTINGS AS SUBSTITUTES FOR ALUMINIUM ALLOY CASTINGS
Fras, E.
Gorny, M.
Lopez, H.
ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (02) : 459 - 465
[26] EUTECTOID TRANSFORMATION IN DUCTILE IRON CASTINGS.
Lietaert, F.
Fonderie belge, 1979, 49 (04): : 12 - 22
[27] RISERING METHODS FOR GRAY AND DUCTILE IRON CASTINGS
KARSAY, SI
INTERNATIONAL CAST METALS JOURNAL, 1980, 5 (04): : 45 - 51
[28] Production of Ductile Cast Iron Ingot-Moulds.
Grozdanic, V.
Metalurgija (Sisak, Yugoslavia), 1986, 25 (01): : 27 - 31
[29] Mg bearing coating of resin sand-PTSA moulds to control graphite degeneration in surface layer of ductile iron castings
Ivan, N.
Chisamera, M.
Riposan, I.
MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (11) : 1246 - 1253
[30] THE ASSESSMENT OF THE NODULE COUNT AND NODULARITY IN DUCTILE IRON CASTINGS BY USING THERMAL ANALYSIS
Glavas, Zoran
Strkalj, Anita
Kozina, Franjo
TEHNICKI GLASNIK-TECHNICAL JOURNAL, 2012, 6 (02): : 145 - 150

← 1 2 3 4 5 →