Synthesis of high purity Cr2AlC nanolamellas with improved tribological properties for oil-based additives

被引：19

作者：

Xue, Maoquan ^{[1
,2
]}

Zhang, Xianghua ^{[1
]}

Tang, Hua ^{[1
]}

Li, Changsheng ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China

[2] Changzhou Inst Light Ind Technol, Changzhou 213164, Jiangsu, Peoples R China

来源：

RSC ADVANCES | 2014年 / 4卷 / 74期

基金：

中国国家自然科学基金;

关键词：

SELECT MAX PHASES; MECHANICAL-PROPERTIES; OXIDATION BEHAVIOR; CERAMICS; TI3ALC2; CORROSION; CRYSTALS; PROGRESS; DENSE;

D O I：

10.1039/c4ra06719c

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Herein, a novel simple method is presented to synthesize highly pure Cr2AlC powder by heating a 2Cr/xAl/C (molar ratio, x = 1, 1.1, 1.2) powder system between 1300 degrees C and 1400 degrees C with preliminary magnetic stirring mixing in alcohol. The purity of Cr2AlC is sensitive to the final temperature and raw material scale, and the excess Al plays a distinct role in improving the purity of the Cr2AlC. The tribological properties of Cr2AlC as an additive in 100SN base oil were evaluated by a UMT-2 ball-on-disc friction and wear tester. The results show that under determinate conditions, the base oil containing 0.6 wt% Cr2AlC sample presented good tribology performance under a load of 10 N. The improved tribological properties of the Cr2AlC samples could be attributed to the formation of a tribofilm in the friction process.

引用

页码：39280 / 39286

页数：7

共 50 条

[41] Synthesis and characterization of the mechanical properties of Ti3SiC2/Mg and Cr2AlC/Mg alloy composites
Nelson, Matt
Agne, Matthias T.
Anasori, Babak
Yang, Jian
Barsoum, Michel W.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 705 : 182 - 188
[42] Investigation of the Composition and Properties of a Cr2AlC MAX Phase-Based Material Prepared by Metallothermic SHS
V. A. Gorshkov
P. A. Miloserdov
A. V. Karpov
A. S. Shchukin
A. E. Sytschev
Physics of Metals and Metallography, 2019, 120 : 471 - 475
[43] Tribological properties of black phosphorus nanosheets as oil-based lubricant additives for titanium alloy-steel contacts
Wang, Qingjuan
Hou, Tingli
Wang, Wei
Zhang, Guoliang
Gao, Yuan
Wang, Kuaishe
ROYAL SOCIETY OPEN SCIENCE, 2020, 7 (09):
[44] Synthesis, microstructure and mechanical properties of Cr2AlC/Al2O3 in situ composites by reactive hot pressing
Zhu, Jianfeng
Jiang, Hao
Wang, Fen
Yang, Chenhui
Xiao, Dan
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (16) : 4137 - 4144
[45] High-Temperature Synthesis of Cast Materials Based on the MAX Phase Cr2AlC Using CaCrO4 + Al + C Mixtures
V. A. Gorshkov
P. A. Miloserdov
N. V. Sachkova
Inorganic Materials, 2020, 56 : 321 - 327
[46] High-Temperature Synthesis of Cast Materials Based on the MAX Phase Cr2AlC Using CaCrO4 + Al + C Mixtures
Gorshkov, V. A.
Miloserdov, P. A.
Sachkova, N. V.
INORGANIC MATERIALS, 2020, 56 (03) : 321 - 327
[47] Copper phosphate nanosheets as high-performance oil-based nanoadditives: Tribological properties and lubrication mechanism
Duan, Linlin
Jia, Dan
Zhan, Shengpeng
Zhang, Wulin
Yang, Tian
Tu, Jiesong
Liu, Jianfang
Li, Jian
Duan, Haitao
TRIBOLOGY INTERNATIONAL, 2023, 179
[48] Synthesis of castor oil-based polyols applicable in acrylated polyurethane coating with improved mechanical properties
Mohanty, Debasmita
Mohanty, Smita
Kanny, Krishnan
POLYMER INTERNATIONAL, 2023, 72 (02) : 230 - 242
[49] The synthesis of two-dimensional MoS2 nanosheets with enhanced tribological properties as oil additives
Yi, Meirong
Zhang, Chenhui
RSC ADVANCES, 2018, 8 (17): : 9564 - 9573
[50] Synthesis by partial oxygenation of graphite-like carbon nitride (OCN) decorated with oleic diethanolamide borate (ODAB) for oil-based lubricant additives and its tribological properties
He, Zengbao
Min, Chunying
Yang, Yuzi
Zhang, Kan
Dong, Changkun
Zhou, Yuhang
Shen, Weixin
NEW JOURNAL OF CHEMISTRY, 2020, 44 (14) : 5377 - 5385

← 1 2 3 4 5 →