Synthesis of high purity Cr2AlC nanolamellas with improved tribological properties for oil-based additives

被引：19
|
作者：
Xue, Maoquan [1 ,2 ]
Zhang, Xianghua [1 ]
Tang, Hua [1 ]
Li, Changsheng [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China
[2] Changzhou Inst Light Ind Technol, Changzhou 213164, Jiangsu, Peoples R China
来源：
RSC ADVANCES | 2014年 / 4卷 / 74期
基金：
中国国家自然科学基金;
关键词：
SELECT MAX PHASES; MECHANICAL-PROPERTIES; OXIDATION BEHAVIOR; CERAMICS; TI3ALC2; CORROSION; CRYSTALS; PROGRESS; DENSE;
D O I：
10.1039/c4ra06719c
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Herein, a novel simple method is presented to synthesize highly pure Cr2AlC powder by heating a 2Cr/xAl/C (molar ratio, x = 1, 1.1, 1.2) powder system between 1300 degrees C and 1400 degrees C with preliminary magnetic stirring mixing in alcohol. The purity of Cr2AlC is sensitive to the final temperature and raw material scale, and the excess Al plays a distinct role in improving the purity of the Cr2AlC. The tribological properties of Cr2AlC as an additive in 100SN base oil were evaluated by a UMT-2 ball-on-disc friction and wear tester. The results show that under determinate conditions, the base oil containing 0.6 wt% Cr2AlC sample presented good tribology performance under a load of 10 N. The improved tribological properties of the Cr2AlC samples could be attributed to the formation of a tribofilm in the friction process.
引用
收藏
页码：39280 / 39286
页数：7
相关论文
共 50 条
  • [21] High-Temperature Synthesis of Cast Cr2AlC at an Inert Gas Overpressure
    Miloserdov, P. A.
    Gorshkov, V. A.
    Yukhvid, V. I.
    INORGANIC MATERIALS, 2013, 49 (08) : 781 - 785
  • [22] Novel Cr2AlC MAX-phase/SiC fiber composites: Synthesis, processing and tribological response
    Gonzalez-Julian, J.
    Llorente, J.
    Bram, M.
    Belmonte, M.
    Guillon, O.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (02) : 467 - 475
  • [23] Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites
    Filimonov, D.
    Gupta, S.
    Palanisamy, T.
    Barsoum, M. W.
    TRIBOLOGY LETTERS, 2009, 33 (01) : 9 - 20
  • [24] Effect of Applied Load and Surface Roughness on the Tribological Properties of Ni-Based Superalloys Versus Ta2AlC/Ag or Cr2AlC/Ag Composites
    D. Filimonov
    S. Gupta
    T. Palanisamy
    M. W. Barsoum
    Tribology Letters, 2009, 33 : 9 - 20
  • [25] Synthesis and ultra-high temperature ablation behavior of a ZrC/Cr2AlC composite
    Li, Haolin
    Li, Shibo
    Zhang, Linquan
    Zhou, Yang
    CERAMICS INTERNATIONAL, 2016, 42 (05) : 5686 - 5692
  • [26] M-site solid solution of vanadium enables the promising mechanical and high-temperature tribological properties of Cr2AlC coating
    Wang, Zhenyu
    Wang, Cuicui
    Zhang, Yupeng
    Wang, Aiying
    Ke, Peiling
    MATERIALS & DESIGN, 2022, 222
  • [27] Tribological Properties of Few-layer Graphene Oxide Sheets as Oil-Based Lubricant Additives
    CHEN Zhe
    LIU Yuhong
    LUO Jianbin
    Chinese Journal of Mechanical Engineering, 2016, 29 (02) : 439 - 444
  • [28] Tribological Properties of Few-layer Graphene Oxide Sheets as Oil-Based Lubricant Additives
    CHEN Zhe
    LIU Yuhong
    LUO Jianbin
    Chinese Journal of Mechanical Engineering, 2016, (02) : 439 - 444
  • [29] Tribological properties of few-layer graphene oxide sheets as oil-based lubricant additives
    Zhe Chen
    Yuhong Liu
    Jianbin Luo
    Chinese Journal of Mechanical Engineering, 2016, 29 : 439 - 444
  • [30] Tribological Properties of Few-layer Graphene Oxide Sheets as Oil-Based Lubricant Additives
    Chen Zhe
    Liu Yuhong
    Luo Jianbin
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2016, 29 (02) : 439 - 444
12345