Carbon nanotubes synthesized by mechanothermal method

被引：6

作者：

Manafi, S. A. ^{[1
]}

Amin, M. H. ^{[1
]}

Rahimipour, M. R. ^{[1
]}

Salahi, E. ^{[1
]}

Kazemzadeh, A. ^{[1
]}

机构：

[1] Mat & Energy Res Ctr, Dept Ceram, Tehran, Iran

来源：

NEW CARBON MATERIALS | 2009年 / 24卷 / 01期

关键词：

Morphology; CNTs; Mechanothermal; HRTEM; LARGE-SCALE SYNTHESIS; VAPOR-DEPOSITION SYNTHESIS; LOW-TEMPERATURE SYNTHESIS; CATALYTIC DECOMPOSITION; ARC-DISCHARGE; CVD SYNTHESIS; NANOPARTICLES; GROWTH; PYROLYSIS; GRAPHITE;

D O I：

10.1016/S1872-5805(08)60035-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A mechanothermal method is one of the methods used for the large scale production of carbon nanotubes (CNTs). The Mike graphite was milled Under argon atmosphere to nanometer sized carbon in amorphous\state, and was then annealed at high temperature (1350-1380 degrees C) to yield CNTs. The milled graphites and CNTs were characterized by XRD, SEM, FE-TEM, HRTEM, and Raman spectroscopy. It is found that the CNTs have a length of several millimeters and a diameter of 30-70 nm with different morphologies. The spring-like MWCNTs have a high aspect ratio (similar to 1000) and a high crystallinity (I-D/I-G similar to 0. 03).

引用

页码：39 / 44

页数：6

共 50 条

[21] Effect of sudden initiation and temperature on growth and diameter of carbon nanotubes synthesized by CVD method
Taleshi, F.
Hosseini, A. A.
INDIAN JOURNAL OF PHYSICS, 2013, 87 (05) : 425 - 430
[22] Effect of sudden initiation and temperature on growth and diameter of carbon nanotubes synthesized by CVD method
F. Taleshi
A. A. Hosseini
Indian Journal of Physics, 2013, 87 : 425 - 430
[23] Double-wall carbon nanotubes synthesized by the abnormal glow discharge plasma method
Yoshikawa, H
Hoshi, F
Kyotani, M
Ishikura, T
Yumura, M
Koga, Y
SURFACE ENGINEERING 2002-SYNTHESIS, CHARACTERIZATION AND APPLICATIONS, 2003, 750 : 223 - 228
[24] Characterization of carbon nanotubes and carbon nitride nanofibres synthesized by PECVD
Point, S.
Minea, T.
Besland, M. -P.
Granier, A.
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2006, 34 (02): : 157 - 163
[25] Effect of carbon nanotubes loading on the photocatalytic activity of zinc oxide/carbon nanotubes photocatalyst synthesized via a modified sol-gel method
Phin, Hor-Yan
Ong, Yit-Thai
Sin, Jin-Chung
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2020, 8 (03):
[26] Field emission properties of carbon nanotubes synthesized by high temperature arc method and low temperature CVD method
Lai, HJ
Kung, SC
Hsu, CM
Li, BJ
Lin, CC
Lin, CJ
NANOTUBE-BASED DEVICES, 2003, 772 : 47 - 52
[27] Purification of single-walled carbon nanotubes synthesized by the hydrogen arc-discharge method
Hou, PX
Liu, C
Tong, Y
Xu, ST
Liu, M
Cheng, HM
JOURNAL OF MATERIALS RESEARCH, 2001, 16 (09) : 2526 - 2529
[28] Metal sulfide coated multiwalled carbon nanotubes synthesized by an in situ method and their optical limiting properties
Wu, Hui-Xia
Cao, Wei-Man
Chen, Qiang
Liu, Miao-Miao
Qian, Shi-Xiong
Jia, Neng-Qin
Yang, Hong
Yang, Shi-Ping
NANOTECHNOLOGY, 2009, 20 (19)
[29] Nanoscratch technique for aligning multiwalled carbon nanotubes synthesized by the arc discharge method in open air
Berkmans, A. Joseph
Jagannatham, M.
Haridoss, Prathap
BULLETIN OF MATERIALS SCIENCE, 2015, 38 (04) : 875 - 886
[30] PREPARATION OF MULTI-WALLED CARBON NANOTUBES USING NiO CATALYST SYNTHESIZED BY HYDROTHERMAL METHOD
Y.J. Zhu
Acta Metallurgica Sinica(English Letters), 2003, (05) : 416 - 420

← 1 2 3 4 5 →