In-process measurement of friction coefficient in orthogonal cutting

被引：54
|
作者：
Smolenicki, D. [1 ]
Boos, J. [1 ]
Kuster, F. [1 ]
Roelofs, H. [2 ]
Wyen, C. F. [3 ]
机构：
[1] Swiss Fed Inst Technol, Inst Machine Tools & Mfg IWF, Zurich, Switzerland
[2] Swiss Steel AG, Emmenbrucke, Switzerland
[3] Rieter Machine Works Ltd, Winterthur, Switzerland
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2014年 / 63卷 / 01期
关键词：
Friction; Cutting; Tribometer; TOOL-CHIP; WEAR; DRY; SIMULATION; TI6AL4V; CONTEXT; STEEL;
D O I：
10.1016/j.cirp.2014.03.083
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to represent actual cutting process conditions, an in-process tribometer is examined to measure friction during orthogonal turning process at cutting speeds up to 300 m/min. The tribometer consists of a spring preloaded tungsten carbide pin with spherical tip mounted behind the cutting edge and rubbing on the freshly generated workpiece surface. The pin preload is set according to feed force. A 3D-force measuring device in the fixation of the pin allows evaluating friction coefficient from tangential and normal forces. Experiments show strongly different results when contacting fresh and oxidized surfaces and decreasing friction coefficient with increasing cutting speed. (C) 2014 CIRP.
引用
收藏
页码：97 / 100
页数：4
相关论文
共 50 条
  • [41] A critical analysis on the friction modeling in orthogonal cutting of steel
    Filice, L.
    Micari, F.
    Rizzuti, S.
    Umbrello, D.
    10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 745 - +
  • [42] Modelling of orthogonal cutting with a temperature dependent friction law
    Moufki, A
    Molinari, A
    Dudzinski, D
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1998, 46 (10) : 2103 - 2138
  • [43] Traceability of In-Process Measurement of Workpiece Geometry
    Acko, Bojan
    Klobucar, Rok
    Acko, Matic
    25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 : 376 - 383
  • [44] Figure controlled turning by in-process measurement
    Saito, D
    Yazawa, T
    Kohno, T
    Kohno, S
    PRECISION ENGINEERING, NANOTECHNOLOGY, VOL 1, PROCEEDINGS, 1999, : 88 - 91
  • [45] IN-PROCESS WAFER TEST AND MEASUREMENT.
    Dey, Jim
    Semiconductor International, 1988, 11 (01) : 52 - 55
  • [46] In-process optical measurement of coating thickness
    Barton, JS
    De Frietas, JM
    Gregory, G
    Jennings, P
    Jones, AC
    Jones, JDC
    Kilpatrick, JM
    Plows, FL
    Spencer, P
    MEASUREMENT & CONTROL, 2000, 33 (01): : 11 - 14
  • [47] An experimental system for in-process measurement testing
    Gao, Y
    Tao, Z
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON FRONTIERS OF DESIGN AND MANUFACTURING, VOL 1, 2002, : 409 - 411
  • [48] In-process prediction of roundness based on dynamic cutting forces
    Tangjitsitcharoen, Somkiat
    Chanthana, Deuanphan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (5-8): : 2229 - 2238
  • [49] In-process prediction of roundness based on dynamic cutting forces
    Somkiat Tangjitsitcharoen
    Deuanphan Chanthana
    The International Journal of Advanced Manufacturing Technology, 2018, 94 : 2229 - 2238
  • [50] IN-PROCESS MEASUREMENT OF TOOLS AND WORKPIECES.
    Hoschka, Juergen
    Energy & Automation, 1987, 9 : 24 - 27
12345