In-process measurement of friction coefficient in orthogonal cutting

被引：54
|
作者：
Smolenicki, D. [1 ]
Boos, J. [1 ]
Kuster, F. [1 ]
Roelofs, H. [2 ]
Wyen, C. F. [3 ]
机构：
[1] Swiss Fed Inst Technol, Inst Machine Tools & Mfg IWF, Zurich, Switzerland
[2] Swiss Steel AG, Emmenbrucke, Switzerland
[3] Rieter Machine Works Ltd, Winterthur, Switzerland
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2014年 / 63卷 / 01期
关键词：
Friction; Cutting; Tribometer; TOOL-CHIP; WEAR; DRY; SIMULATION; TI6AL4V; CONTEXT; STEEL;
D O I：
10.1016/j.cirp.2014.03.083
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to represent actual cutting process conditions, an in-process tribometer is examined to measure friction during orthogonal turning process at cutting speeds up to 300 m/min. The tribometer consists of a spring preloaded tungsten carbide pin with spherical tip mounted behind the cutting edge and rubbing on the freshly generated workpiece surface. The pin preload is set according to feed force. A 3D-force measuring device in the fixation of the pin allows evaluating friction coefficient from tangential and normal forces. Experiments show strongly different results when contacting fresh and oxidized surfaces and decreasing friction coefficient with increasing cutting speed. (C) 2014 CIRP.
引用
收藏
页码：97 / 100
页数：4
相关论文
共 50 条
  • [31] Estimation of Friction Coefficient Related to Squeal in Cutting
    Luo Yujun
    Gao Zhongyong
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 603 - 608
  • [32] Resolution of the Friction Coefficient of Adhesion Under Cutting
    Ivchenko, Oleksandr
    Zhyhylii, Dmytro
    Zaloha, Olha
    Zaloga, Viliam
    Dehtiarenko, Oleksandr
    ADVANCED MANUFACTURING PROCESSES (INTERPARTNER-2019), 2020, : 98 - 107
  • [33] In-process detection of fiber cutting in low consistency refining based on measurement of forces on refiner bars
    Harirforoush, R.
    Olson, J.
    Wild, P.
    TAPPI JOURNAL, 2017, 16 (04): : 189 - 199
  • [34] Temperature measurement in orthogonal metal cutting
    S. P. F. C. Jaspers
    J. H. Dautzenberg
    D. A. Taminiau
    The International Journal of Advanced Manufacturing Technology, 1998, 14 : 7 - 12
  • [35] Temperature measurement in orthogonal metal cutting
    Jaspers, S.P.F.C.
    Dautzenberg, J.H.
    Taminiau, D.A.
    1998, Springer-Verlag London Ltd., London, United Kingdom (14):
  • [36] The measurement of parasitic forces in orthogonal cutting
    Stevenson, R
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1998, 38 (1-2): : 113 - 130
  • [37] Temperature measurement in orthogonal metal cutting
    Jaspers, SPFC
    Dautzenberg, JH
    Taminiau, DA
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1998, 14 (01): : 7 - 12
  • [38] Measurement of parasitic forces in orthogonal cutting
    Stevenson, Robin
    International Journal of Machine Tools and Manufacture, 1998, 38 (1-2): : 113 - 130
  • [39] ELECTROOPTICAL DATA ANALYZER FOR IN-PROCESS MEASUREMENT
    ELWARDANY, TI
    RASHED, OA
    FOURTH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED PRODUCTION ENGINEERING, 1988, : 435 - 441
  • [40] Energy balance of the orthogonal cutting process
    Iskra, P
    Tanaka, C
    Ohtani, T
    HOLZ ALS ROH-UND WERKSTOFF, 2005, 63 (05) : 358 - 364
12345