Tool stability analysis for deep hole drilling

被引：16

作者：

Gorbatyuk, Sergey ^{[1
]}

Kondratenko, Valery ^{[1
]}

Sedykh, Larisa ^{[1
]}

机构：

[1] Natl Univ Sci & Technol MISiS, 4 Leninsky Prospect, Moscow 119991, Russia

来源：

INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2018) | 2018年 / 224卷

关键词：

D O I：

10.1051/matecconf/201822401035

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A large number of parts have deep holes, therefore, rotary cutting tools, which represent relatively long and thin columns are used for holemaking. In this article we analyze the behavior of such tools under the influence of an axial compression load, in our case, the axial cutting force F-p, which differs fundamentally from the compression of short tools. Moreover, experience shows that when the cutting force Fp reaches a certain critical value equal to F-kp,, a long straight column becomes unstable.

引用

页数：7

共 50 条

[31] Optimizing deep-hole drilling
Sandvik Coromant Co, Fair Lawn, United States
Cutting Tool Eng, 1 (32-33, 35-38):
[32] DRILLING CONTRACTORS - STUCK IN A DEEP HOLE
CARTER, RA
E&MJ-ENGINEERING AND MINING JOURNAL, 1992, 193 (05): : 33 - 35
[33] The Hole Story: A Deep Dive on Drilling
Lorincz, Jim
MANUFACTURING ENGINEERING, 2023, 170 (02): : 64 - 68
[34] Bifurcations of Deep Hole Drilling Process
Bykador, V. S.
Bykador , Zh. E.
INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017), 2017, 206 : 151 - 156
[35] Tool life improvement by peck drilling and thrust force monitoring during deep-micro-hole drilling of steel
Kim, Duck Whan
Lee, Young Soo
Park, Min Soo
Chu, Chong Nam
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (3-4): : 246 - 255
[36] STUDY ON DEEP-HOLE DRILLING OF HEAT EXCHANGER TUBE PLATE - DRILLING OF STACKED PLATES BY BTA TOOL.
Kakita, Hiroshi
Minami, Kohjiro
Yoneda, Mitsuo
Sato, Takuro
Komura, Akio
Honda, Shoichi
Hitachi Zosen Technical Review, 1984, 45 (03): : 37 - 45
[37] ANSYS is Used on Drilling Inner Blind Hole on Deep Hole
Tianqi Wang
Xin Liu
Zhanfeng Liu
Yanshu Liu
Yukun Zhang
Zhe Wang
Wireless Personal Communications, 2018, 103 : 1077 - 1088
[38] ANSYS is Used on Drilling Inner Blind Hole on Deep Hole
Wang, Tianqi
Liu, Xin
Liu, Zhanfeng
Liu, Yanshu
Zhang, Yukun
Wang, Zhe
WIRELESS PERSONAL COMMUNICATIONS, 2018, 103 (01) : 1077 - 1088
[39] Tool type and hole diameter influence in deep ultrasonic drilling of micro-holes in glass
Schorderet, A.
Deghilage, E.
Agbeviade, K.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 565 - 570
[40] Process-parallel center deviation measurement of a BTA deep-hole drilling tool
Denkena, Berend
Bergmann, Benjamin
Kaiser, Sebastian
Muecke, Markus
Bolle, Dieter
4TH INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: INTELLIGENT, FLEXIBLE AND CONNECTED SYSTEMS IN PRODUCTS AND PRODUCTION, 2018, 24 : 229 - 234

← 1 2 3 4 5 →