Tool stability analysis for deep hole drilling

被引：16

作者：

Gorbatyuk, Sergey ^{[1
]}

Kondratenko, Valery ^{[1
]}

Sedykh, Larisa ^{[1
]}

机构：

[1] Natl Univ Sci & Technol MISiS, 4 Leninsky Prospect, Moscow 119991, Russia

来源：

INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2018) | 2018年 / 224卷

关键词：

D O I：

10.1051/matecconf/201822401035

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A large number of parts have deep holes, therefore, rotary cutting tools, which represent relatively long and thin columns are used for holemaking. In this article we analyze the behavior of such tools under the influence of an axial compression load, in our case, the axial cutting force F-p, which differs fundamentally from the compression of short tools. Moreover, experience shows that when the cutting force Fp reaches a certain critical value equal to F-kp,, a long straight column becomes unstable.

引用

页数：7

共 50 条

[21] Analysis of the Influence of Tool Geometry on Surface Integrity in Single-lip Deep Hole Drilling with Small Diameters
Biermann, D.
Heilmann, M.
Kirschner, M.
1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
[22] Computational analysis for dynamic characteristics of drilling shaft system in deep slot hole drilling
School of Mechanical and Instrumental Engineering, Xi'An University of Technology, Xian 710048, China
Adv. Mater. Res., (1668-1673):
[23] Computational Analysis for Dynamic Characteristics of Drilling Shaft System in Deep Slot Hole Drilling
Kong, Lingfei
Li, Yan
Lu, Yanjun
MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 1668 - 1673
[24] Investigation of Chip Deformation and Breaking with a Staggered Teeth BTA Tool in Deep Hole Drilling
Li, Xu-Bo
Zheng, Jian-Ming
Li, Yan
Kong, Ling-Fei
Shi, Wei-Chao
Guo, Bian
METALS, 2019, 9 (01)
[25] Tool Condition Monitoring in Deep Hole Gun Drilling: A Data-Driven Approach
Hong, Jihoon
Zhou, Jun Hong
Chan, Hian Leng
Zhang, Chong
Xu, Huan
Hong, Geok Soon
2017 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEM), 2017, : 2148 - 2152
[26] Cutting process in non-step drilling of deep hole with tool wear progress
Tamura, Shoichi
Matsumura, Takashi
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2024, 18 (04):
[27] Effect of MQL on the tool life of small twist drills in deep-hole drilling
Heinemann, R
Hinduja, S
Barrow, G
Petuelli, G
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (01): : 1 - 6
[28] Strength and Stability Analysis of Deep Sea Drilling Risers
Yang Jin1
Petroleum Science, 2007, (02) : 60 - 65
[29] Strength and stability analysis of deep sea drilling risers
Yang Jin
Liu Caihong
Liu Hanbin
Xie Renjun
Cao Shijing
PETROLEUM SCIENCE, 2007, 4 (02) : 60 - 65
[30] Deep hole drilling technique (DHD)
Kawai S.
Nagai T.
Okano S.
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2019, 88 (06): : 485 - 488

← 1 2 3 4 5 →