Design and evaluation of a shunted flexible piezoelectric damper for vibration control of cable structures

被引:9
|
作者
Xie, Fei [1 ]
Su, Yu [1 ]
Zhou, Wei [1 ]
Zhang, Wei-Zhong [2 ]
机构
[1] Beijing Inst Technol, Sch Aerosp Engn, Dept Mech, Beijing 100081, Peoples R China
[2] Beijing Inst Technol, Sch Aerosp Engn, Minist Educ, Key Lab Dynam & Control Flight Vehicles, Beijing 100081, Peoples R China
基金
中国国家自然科学基金;
关键词
vibration control; piezoelectric; flexible cable structure; shunt circuit; POSITIVE POSITION FEEDBACK; NET STRUCTURES; NEGATIVE CAPACITANCES; RL SHUNTS; ENHANCEMENT; SUPPRESSION; CALIBRATION;
D O I
10.1088/1361-665X/ab2c14
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
In this work a shunted flexible piezoelectric damping system is designed and numerically evaluated for the purpose of vibration attenuation of large deployable space cable structures. We propose a design of a tube-shaped flexible piezoelectric energy absorber consisting of multilayered PVDF sectors, which could be shunted with two types of passive electric circuits, i.e. the series resistance-inductance (LR) shunt and the series resistance-negative capacitance (NC-R) shunt. The compatible stiffness of the PVDF tube ensures an effective transformation of deformation from the vibrating cable to the energy absorber. For best performance we carried out optimization on the geometric parameters of the PVDF tube. By analysis we found that the optimal thickness of the PVDF tube is roughly 0.4 times of the inner tube radius. We optimized the shunt circuits and selected the appropriate distribution position of the damper in the flexible cable structures. The performance of the design was numerically evaluated based on three problems, namely the longitudinal vibration of a single-cable structure, the transverse vibration of a single-cable structure and the vibration of a cross-cable structure. Based on the results, we confirm the remarkable performance of the design. Being highly frequency dependent, the design with the LR shunt only works for one deformation mode at a time, e.g. bending or stretching. In contrast, the design with the NC-R shunt works for both modes as it has a much wider frequency band. The design with the LR shunt has better performance than the NC-R shunt when dealing with the stretching deformation mode only. For vibration with combined stretching and bending, however, the performance of both designs is equally good. This is because the NC-R shunt can work for both deformation modes simultaneously, and hence it shows great adaptability and application potential in vibration control of complex flexible space structures.
引用
收藏
页数:13
相关论文
共 50 条
  • [31] Modal-based mixed vibration control for uncertain piezoelectric flexible structures
    Xu, Yalan
    Qian, Yu
    Chen, Jianjun
    Song, Gangbing
    STRUCTURAL ENGINEERING AND MECHANICS, 2015, 55 (01) : 229 - 244
  • [32] Experimental study of vibration control of a cable with an attached MR damper
    Maslanka, Marcin
    Sapinski, Bogdan
    Snamina, Jacek
    JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2007, 45 (04) : 893 - 917
  • [33] A LQR controller design for active vibration control of flexible structures
    Zhang, Jingjun
    He, Lili
    Wang, Ercheng
    Gao, Ruizhen
    PACIIA: 2008 PACIFIC-ASIA WORKSHOP ON COMPUTATIONAL INTELLIGENCE AND INDUSTRIAL APPLICATION, VOLS 1-3, PROCEEDINGS, 2008, : 123 - 128
  • [34] Control–structural design optimization for vibration of piezoelectric intelligent truss structures
    Guozhong Zhao
    Biaosong Chen
    Yuanxian Gu
    Structural and Multidisciplinary Optimization, 2009, 37
  • [35] Design of Shunted Piezoelectric Patches Using Topology Optimization for Noise and Vibration Attenuation
    Larbi, Walid
    Deu, Jean-Francois
    da Silva, Luciano Pereira
    ADVANCES IN ACOUSTICS AND VIBRATION, 2017, 5 : 23 - 33
  • [36] Multimode vibration control using several piezoelectric transducers shunted with a multiterminal network
    Giorgio, Ivan
    Culla, Antonio
    Del Vescovo, Dionisio
    ARCHIVE OF APPLIED MECHANICS, 2009, 79 (09) : 859 - 879
  • [37] Multimode vibration control using several piezoelectric transducers shunted with a multiterminal network
    Ivan Giorgio
    Antonio Culla
    Dionisio Del Vescovo
    Archive of Applied Mechanics, 2009, 79
  • [38] Multimodal passive vibration control of sandwich beams with shunted shear piezoelectric materials
    Trindade, M. A.
    Maio, C. E. B.
    SMART MATERIALS & STRUCTURES, 2008, 17 (05):
  • [39] Vibration Control of Plates Featuring Periodic Arrays of Hybrid Shunted Piezoelectric Patches
    Casadei, F.
    Ruzzene, M.
    Beck, B.
    Cunefare, K.
    ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2009, 2009, 7288
  • [40] Vibration and Wave Propagation Control of Plates with Periodic Arrays of Shunted Piezoelectric Patches
    Spadoni, A.
    Ruzzene, M.
    Cunefare, K.
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2009, 20 (08) : 979 - 990