Design and evaluation of a shunted flexible piezoelectric damper for vibration control of cable structures

被引:9
|
作者
Xie, Fei [1 ]
Su, Yu [1 ]
Zhou, Wei [1 ]
Zhang, Wei-Zhong [2 ]
机构
[1] Beijing Inst Technol, Sch Aerosp Engn, Dept Mech, Beijing 100081, Peoples R China
[2] Beijing Inst Technol, Sch Aerosp Engn, Minist Educ, Key Lab Dynam & Control Flight Vehicles, Beijing 100081, Peoples R China
基金
中国国家自然科学基金;
关键词
vibration control; piezoelectric; flexible cable structure; shunt circuit; POSITIVE POSITION FEEDBACK; NET STRUCTURES; NEGATIVE CAPACITANCES; RL SHUNTS; ENHANCEMENT; SUPPRESSION; CALIBRATION;
D O I
10.1088/1361-665X/ab2c14
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
In this work a shunted flexible piezoelectric damping system is designed and numerically evaluated for the purpose of vibration attenuation of large deployable space cable structures. We propose a design of a tube-shaped flexible piezoelectric energy absorber consisting of multilayered PVDF sectors, which could be shunted with two types of passive electric circuits, i.e. the series resistance-inductance (LR) shunt and the series resistance-negative capacitance (NC-R) shunt. The compatible stiffness of the PVDF tube ensures an effective transformation of deformation from the vibrating cable to the energy absorber. For best performance we carried out optimization on the geometric parameters of the PVDF tube. By analysis we found that the optimal thickness of the PVDF tube is roughly 0.4 times of the inner tube radius. We optimized the shunt circuits and selected the appropriate distribution position of the damper in the flexible cable structures. The performance of the design was numerically evaluated based on three problems, namely the longitudinal vibration of a single-cable structure, the transverse vibration of a single-cable structure and the vibration of a cross-cable structure. Based on the results, we confirm the remarkable performance of the design. Being highly frequency dependent, the design with the LR shunt only works for one deformation mode at a time, e.g. bending or stretching. In contrast, the design with the NC-R shunt works for both modes as it has a much wider frequency band. The design with the LR shunt has better performance than the NC-R shunt when dealing with the stretching deformation mode only. For vibration with combined stretching and bending, however, the performance of both designs is equally good. This is because the NC-R shunt can work for both deformation modes simultaneously, and hence it shows great adaptability and application potential in vibration control of complex flexible space structures.
引用
收藏
页数:13
相关论文
共 50 条
  • [21] Optimal Position of Piezoelectric Elements in Flexible Structures Active Vibration Control
    Zhang, Jingjun
    He, Lili
    Wang, Ercheng
    Gao, Ruizhen
    2008 INTERNATIONAL SYMPOSIUM ON INTELLIGENT INFORMATION TECHNOLOGY APPLICATION, VOL III, PROCEEDINGS, 2008, : 895 - +
  • [22] Vibration control of smart composite structures using shunted piezoelectric systems and neuro-fuzzy techniques
    Tairidis, Georgios K.
    JOURNAL OF VIBRATION AND CONTROL, 2019, 25 (18) : 2397 - 2408
  • [23] Vibration suppression in flexible parallel cable structures
    Tang L.
    Shi P.
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2021, 61 (03): : 202 - 208
  • [24] Finite Element Based Design of Piezoelectric Vibration Damper
    Bhatti, J. S.
    Pasha, R. A.
    ADVANCED MATERIALS XI, 2010, 442 : 431 - +
  • [25] Wave propagation control in smart structures with shunted piezoelectric patches
    Huang, T. L.
    Ichchou, M. N.
    Collet, M.
    Bareille, O.
    Ouisse, M.
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012), 2012, : 279 - 293
  • [26] The Flexible Cable Deformation Effect of a Prestressed Tuned Mass Damper on Vibration Control for Wind Turbine Towers
    Lei, Zhenbo
    Liu, Gang
    Tang, Wei
    Li, Mengzhu
    INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2023, 23 (12)
  • [27] Passive vibration control of a cantilever beam using shunted piezoelectric element
    Mohammadi, Arman
    Zakerzadeh, Mohammad Reza
    Yousefi-Koma, Aghil
    Mohajerin, Sadaf
    Zohoori, Saeed
    2017 5TH RSI INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHATRONICS (ICROM 2017), 2017, : 389 - 393
  • [28] Finite element-based analysis of shunted piezoelectric structures for vibration damping
    Becker, Jens
    Fein, Oliver
    Maess, Matthias
    Gaul, Lothar
    COMPUTERS & STRUCTURES, 2006, 84 (31-32) : 2340 - 2350
  • [29] Study of the cable-MR damper system vibration control
    School of Civil Engineering, Hunan University, Changsha 410082, China
    不详
    Gongneng Cailiao, 2006, 5 (823-826):
  • [30] Experimental research on the vibration control of large flexible space structures with piezoelectric devices
    Li, DX
    IMAC - PROCEEDINGS OF THE 16TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS 1 AND 2, 1998, 3243 : 247 - 250