Effect of GDC Electrolyte Thickness on the Performance of Anode Supported Micro Tubular SOFC

被引:4
|
作者
Otake, Takanori [1 ]
Yokoyama, Misuzu [1 ]
Nagai, Kohki [1 ]
Ukai, Kenji [1 ]
Mizutani, Yasunobu [1 ]
机构
[1] Toho Gas Co Ltd, Tokai, Aichi 4768501, Japan
来源
关键词
D O I
10.1149/1.2729135
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Anode supported micro tubular SOFC has been studied because it has high energy density and thermal shock resistance. Relationship between the performance of micro tubular cells and thickness of the GDC electrolyte was examined at temperatures between 500 degrees C and 650 degrees C. Performance of the cell with 15.5 mu m thick electrolyte was higher than the cell with 40 mu m thick at lower temperatures, but lower at higher temperatures. At lower temperatures, ohmic loss is dominant in the voltage drop, but at higher temperatures, leakage of electron through the GDC electrolyte is main reason for the voltage drop.
引用
收藏
页码:551 / 554
页数:4
相关论文
共 50 条
  • [41] Fabrication and co-sintering of thin tubular IT-SOFC with Cu2O-GDC cermet supporting anode and Li2O-doped GDC electrolyte
    Azzolini, Andrea
    Downs, John
    Sglavo, Vincenzo M.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (07) : 2119 - 2127
  • [42] Performance of YSZ electrolyte layer deposited by atmospheric plasma spraying for cermet-supported tubular SOFC
    Li, CJ
    Li, CX
    Ning, MJ
    VACUUM, 2004, 73 (3-4) : 699 - 703
  • [43] Electrolyte thickness control and its effect on electrolyte/anode dual-layer hollow fibres for micro-tubular solid oxide fuel cells
    Othman, Mohd Hafiz Dzarfan
    Droushiotis, Nicolas
    Wu, Zhentao
    Kanawka, Krzysztof
    Kelsall, Geoff
    Li, K.
    JOURNAL OF MEMBRANE SCIENCE, 2010, 365 (1-2) : 382 - 388
  • [44] Anode Supported Tubular Cell Fabrication and Performance
    McPhee, W. A. G.
    Menard, P. D.
    Gatto, N. S.
    Sammes, N. M.
    Reifsnider, K. L.
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 511 - 520
  • [45] The effect of anode thickness on the performance of anode-supported solid oxide fuel cells
    Kim, JW
    Virkar, AV
    SOLID OXIDE FUEL CELLS (SOFC VI), 1999, 99 (19): : 830 - 839
  • [46] Effect of plasma sprayed anode surface structure on metal-supported SOFC performance
    Yu, Guo
    Chen, Song
    Liu, Taikai
    Kui, Wen
    Zhang, Xiaofeng
    Jie, Mao
    Deng, Chunming
    Deng, Changguang
    Min, Liu
    Liao, Hanlin
    CERAMICS INTERNATIONAL, 2025, 51 (06) : 7495 - 7501
  • [47] Influence of Deposition Temperature of GDC Interlayer Deposited by RF Magnetron Sputtering on Anode-Supported SOFC
    Wu, W.
    Wang, X.
    Liu, Z.
    Zhao, Z.
    Ou, D.
    Tu, B.
    Cheng, M.
    FUEL CELLS, 2014, 14 (02) : 171 - 176
  • [48] Operation of an LSGMC electrolyte-supported SOFC with composite ceramic anode and cathode
    Pine, Thomas S.
    Lu, Xinyu
    Do, Anh-Tuan V.
    Mumm, Daniel R.
    Brouwer, Jacob
    ELECTROCHEMICAL AND SOLID STATE LETTERS, 2007, 10 (10) : B183 - B185
  • [49] A corrugated mesoscale structure on electrode-electrolyte interface for enhancing cell performance in anode-supported SOFC
    Konno, Akio
    Iwai, Hiroshi
    Saito, Motohiro
    Yoshida, Hideo
    JOURNAL OF POWER SOURCES, 2011, 196 (18) : 7442 - 7449
  • [50] Enhanced electrochemical performance of SOFC: GDC electrolyte grains encapsulation via DZSB film
    Chen, Jianpeng
    Zhang, Deyi
    He, Yulian
    Zhang, Longtao
    Wang, Shouqi
    CERAMICS INTERNATIONAL, 2024, 50 (03) : 5169 - 5178