Effect of GDC Electrolyte Thickness on the Performance of Anode Supported Micro Tubular SOFC

被引:4
|
作者
Otake, Takanori [1 ]
Yokoyama, Misuzu [1 ]
Nagai, Kohki [1 ]
Ukai, Kenji [1 ]
Mizutani, Yasunobu [1 ]
机构
[1] Toho Gas Co Ltd, Tokai, Aichi 4768501, Japan
来源
关键词
D O I
10.1149/1.2729135
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Anode supported micro tubular SOFC has been studied because it has high energy density and thermal shock resistance. Relationship between the performance of micro tubular cells and thickness of the GDC electrolyte was examined at temperatures between 500 degrees C and 650 degrees C. Performance of the cell with 15.5 mu m thick electrolyte was higher than the cell with 40 mu m thick at lower temperatures, but lower at higher temperatures. At lower temperatures, ohmic loss is dominant in the voltage drop, but at higher temperatures, leakage of electron through the GDC electrolyte is main reason for the voltage drop.
引用
收藏
页码:551 / 554
页数:4
相关论文
共 50 条
  • [21] Preparation and performance of IT-SOFC with anode-supported thin GDC electrolytes by tape casting process
    Cheng, JG
    Fu, QX
    Liu, XQ
    Peng, DK
    Meng, GY
    HIGH-PERFORMANCE CERAMICS 2001, PROCEEDINGS, 2002, 224-2 : 173 - 177
  • [22] Characteristics of electrolyte supported micro-tubular solid oxide fuel cells with GDC-ScSZ bilayer electrolyte
    Hsieh, Wen-Shuo
    Lin, Pang
    Wang, Sea-Fue
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (30) : 17267 - 17274
  • [23] Effect of Anode Support Thickness on the Performance of Tubular SOFCs
    Son, Hui-Jeong
    Lim, Tak-Hyoung
    Lee, Seung-Bok
    Shin, Dong-ryul
    Song, Rak-Hyun
    Kim, Sung-Hyun
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 543 - +
  • [24] ANODE SUPPORTED SOFC WITH GDC BARRIER LAYER DEPOSITED BY AEROSOL DEPOSITION METHOD
    Seong, Byeong-Geun
    Song, Jung-Hoon
    Park, Young-Min
    Bae, Hong-Youl
    Ahn, Jin-Soo
    Kim, Do-Hyeong
    Jun, Joong-Hwan
    Choi, Jong-Jin
    Park, Dong-Soo
    PROCEEDINGS OF THE ASME 8TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY 2010, VOL 1, 2010, : 351 - 357
  • [25] The properties and performance of micro-tubular (less than 1 mm OD) anode supported SOFC for APU-applications
    Sammes, Nigel
    Smirnova, Alevtina
    Mohammadi, Alidad
    Serincan, Fazil
    Xiaoyu, Zhang
    Awano, Masanobu
    Suzuki, Tos
    Yamaguchi, Toshiaki
    Fujishiro, Yoshinobu
    Funahashi, Yoshihiro
    MINI-MICRO FUEL CELLS: FUNDAMENTALS AND APPLICATIONS, 2008, : 391 - +
  • [26] Anode performance control of micro-tubular SOFC via wet coating method
    Yamaguchi, Toshiaki
    Sammes, Nigel
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (13) : 7656 - 7660
  • [27] Fabrication and characteristics of anode-supported flat tubular SOFC
    Song, RH
    Kim, JH
    Son, HJ
    Shin, DR
    Yokokawa, H
    SOLID OXIDE FUEL CELLS VIII (SOFC VIII), 2003, 2003 (07): : 1029 - 1034
  • [28] Effect of anode microstructure on the performance of micro tubular SOFCs
    Suzuki, Toshio
    Funahashi, Yoshihiro
    Yamaguchi, Toshiaki
    Fujishiro, Yoshinobu
    Awano, Masanobu
    SOLID STATE IONICS, 2009, 180 (6-8) : 546 - 549
  • [29] Development of a 700 W anode-supported micro-tubular SOFC stack for APU applications
    Advanced Fuel Cell Research Center, Korea Institute of Energy Research, 71-2, Jang-dong, Yuseong-gu, Daejeon, Korea, Republic of
    不详
    Int J Hydrogen Energy, 2008, 9 (2330-2336):
  • [30] Performance of anode supported planar SOFC cells
    Ghosh, D
    Wang, G
    Brule, R
    Tang, E
    Huang, P
    SOLID OXIDE FUEL CELLS (SOFC VI), 1999, 99 (19): : 822 - 829