Tubular Metal Supported SOFC Development for Domestic Power Generation

被引：16
|
作者：
Villarreal, I. [1 ]
Rivas, M. [1 ]
Rodriguez-Martinez, L. M. [1 ]
Otaegi, L. [1 ]
Zabala, A. [1 ]
Gomez, N. [1 ]
Alvarez, M. A. [1 ]
Antepara, I. [1 ]
Arizmendiarrieta, N. [1 ]
Manzanedo, J. [1 ]
Olave, M. [1 ]
Urriolabeitia, A. [1 ]
Burgos, N. [2 ]
Castro, F. [2 ]
Laresgoiti, A. [1 ]
机构：
[1] Ikerlan, Parque Tecnol Alava,Juan de la Cierva 1, Minano 01510, Spain
[2] CEIT, San Sebastian, Spain
来源：
SOLID OXIDE FUEL CELLS 11 (SOFC-XI) | 2009年 / 25卷 / 02期
关键词：
D O I：
10.1149/1.3205583
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Tubular metal supported SOFC technology has successfully been developed over the past years with the aim at domestic CHP systems below 3 kWe. The basic cell structure consists of a metal porous support, a protective barrier layer, an anode and an electrolyte cofired at 1350 degrees C. Cathode and contacting layers are subsequently sintered at lower temperatures. Latest achievements include average cell performances of 400 mW/cm(2) at 0.7 V and 800 degrees C, over 350 thermal cycles and more than 1500 hours of steady operation. Several stack concepts are currently being tested and BoP components such as fuel processing, power electronics and control system developed in parallel to achieve a successful micro-CHP proof of concept by the end of 2010.
引用
收藏
页码：689 / 694
页数：6
相关论文
共 50 条
  • [41] CAE supported design solution generation in metal forming product development
    Fu, MW
    Yong, MS
    Tong, S
    Wong, CC
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 375 - 382
  • [42] SOFC power generation system by bio-gasification
    Dey, Tapobrata
    Singdeo, Debanand
    Pophale, Aditya
    Bose, Manaswita
    Ghosh, Prakash C.
    4 INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESEARCH (ICAER 2013), 2014, 54 : 748 - 755
  • [43] Modeling and Control of SOFC Based Stationary Power Generation
    Lan, Tian
    Xu, Rong
    Zhai, Xuebing
    Yin, Hang
    Lan, Yuanliang
    Zhou, Yuzhen
    Wang, Xuejun
    2019 4TH IEEE WORKSHOP ON THE ELECTRONIC GRID (EGRID), 2019, : 230 - 234
  • [44] Aircraft Engine Electrical Power Generation with a SOFC Combustor
    Roberts, Rory A.
    Therkelsen, Peter
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 3A, 2014,
  • [45] The Status of SOFC Development at Versa Power Systems
    Borglum, B.
    Tang, E.
    Pastula, M.
    SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 65 - 70
  • [46] Development of a SOFC Power Generator for the Indian Market
    Pfeifer, T.
    Chakradeo, A.
    Ahire, N.
    Baade, J.
    Barthel, M.
    Dosch, C.
    Naeke, R.
    Hartmann, M.
    FUEL CELLS, 2017, 17 (04) : 550 - 561
  • [47] Development of anode-supported flat tube SOFC stack
    Song, RH
    Kim, JH
    Ryoo, SN
    Son, HJ
    Lee, GY
    Peck, DH
    Jung, DH
    Shin, DR
    SOLID STATE IONICS: THE SCIENCE AND TECHNOLOGY OF IONS IN MOTION, 2004, : 107 - 117
  • [48] Electrically conductive diffusion barrier layers for metal-supported SOFC
    Brandner, Marco
    Bram, Martmi
    Froitzheim, Jan
    Buchkremer, H. P.
    Stoever, D.
    SOLID STATE IONICS, 2008, 179 (27-32) : 1501 - 1504
  • [49] Improvement of the internal reforming of metal-supported SOFC at low temperatures
    Miura, Yohei
    Takemiya, Satoshi
    Fukuyama, Yosuke
    Kato, Takashi
    Taniguchi, Shunsuke
    Sasaki, Kazunari
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2023, 48 (65) : 25487 - 25498
  • [50] Investigation of Fe-Cr-Al Alloy for Metal Supported SOFC
    Pham, H. -C.
    Taniguchi, S.
    Inoue, Y.
    Chou, J. -T
    Matsuda, J.
    Sasaki, K.
    SOLID OXIDE FUEL CELLS 15 (SOFC-XV), 2017, 78 (01): : 2069 - 2075
12345