Tubular Metal Supported SOFC Development for Domestic Power Generation

被引：16
|
作者：
Villarreal, I. [1 ]
Rivas, M. [1 ]
Rodriguez-Martinez, L. M. [1 ]
Otaegi, L. [1 ]
Zabala, A. [1 ]
Gomez, N. [1 ]
Alvarez, M. A. [1 ]
Antepara, I. [1 ]
Arizmendiarrieta, N. [1 ]
Manzanedo, J. [1 ]
Olave, M. [1 ]
Urriolabeitia, A. [1 ]
Burgos, N. [2 ]
Castro, F. [2 ]
Laresgoiti, A. [1 ]
机构：
[1] Ikerlan, Parque Tecnol Alava,Juan de la Cierva 1, Minano 01510, Spain
[2] CEIT, San Sebastian, Spain
来源：
SOLID OXIDE FUEL CELLS 11 (SOFC-XI) | 2009年 / 25卷 / 02期
关键词：
D O I：
10.1149/1.3205583
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Tubular metal supported SOFC technology has successfully been developed over the past years with the aim at domestic CHP systems below 3 kWe. The basic cell structure consists of a metal porous support, a protective barrier layer, an anode and an electrolyte cofired at 1350 degrees C. Cathode and contacting layers are subsequently sintered at lower temperatures. Latest achievements include average cell performances of 400 mW/cm(2) at 0.7 V and 800 degrees C, over 350 thermal cycles and more than 1500 hours of steady operation. Several stack concepts are currently being tested and BoP components such as fuel processing, power electronics and control system developed in parallel to achieve a successful micro-CHP proof of concept by the end of 2010.
引用
收藏
页码：689 / 694
页数：6
相关论文
共 50 条
  • [31] Power Generation Experiment Of Segmented Planar SOFC
    Iwai, H.
    Saito, M.
    Yoshida, H.
    Kodani, K.
    Yoshikata, K.
    Ooboshi, T.
    FUEL CELL SEMINAR 2007, 2008, 12 (01): : 431 - +
  • [32] Portable Propane Micro-Tubular SOFC System Development
    Finnerty, C.
    Robinson, C.
    Andrews, S.
    Du, Y.
    Cheekatamarla, P.
    DeWald, P.
    Lu, Y.
    Schwartz, T.
    SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 483 - 492
  • [33] Development of anode-supported SOFC with metallic interconnectors
    Baba, Y
    Ogasawara, K
    Yakabe, H
    Matsuzaki, Y
    Sakurai, T
    SOLID OXIDE FUEL CELLS VIII (SOFC VIII), 2003, 2003 (07): : 119 - 126
  • [34] Metal-supported SOFC with Ceramic-based Anode
    Blennow, P.
    Klemenso, T.
    Persson, A. H.
    Brodersen, K.
    Srivastava, A. K.
    Sudireddy, B. R.
    Ramousse, S.
    Mogensen, M.
    SOLID OXIDE FUEL CELLS 12 (SOFC XII), 2011, 35 (01): : 683 - 692
  • [35] Planar Metal-Supported SOFC with Novel Cermet Anode
    Blennow, P.
    Hjelm, J.
    Klemenso, T.
    Persson, A. H.
    Ramousse, S.
    Mogensen, M.
    FUEL CELLS, 2011, 11 (05) : 661 - 668
  • [36] INVESTIGATION OF MIXED CONDUCTING CATHODE FOR METAL-SUPPORTED SOFC
    Kim, Yu-Mi
    Bae, Joongmyeon
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY, 2009, : 847 - 849
  • [37] Redox-stability of a Planar Metal-supported SOFC
    Roehrens, D.
    Buechler, O.
    Sebold, D.
    Kappertz, M.
    Schafbauer, W.
    Franco, Th
    Menzler, N. H.
    Buchkremer, H. -P.
    SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 665 - 672
  • [38] An Experimental Investigation of a Co-generation Energy System Using a Tubular SOFC: A Renewable Energy Solution for Power and Heat
    Ullah, K. R.
    Akikur, R. K.
    Ping, H. W.
    Saidur, R.
    Hajimolana, S. A.
    Hussain, M. A.
    PROCEEDINGS OF THE 2014 INTERNATIONAL CONFERENCE & UTILITY EXHIBITION ON GREEN ENERGY FOR SUSTAINABLE DEVELOPMENT (ICUE), 2014,
  • [39] Design and fabrication of a 100 W anode supported micro-tubular SOFC stack
    Sammes, NM
    Du, Y
    Bove, R
    JOURNAL OF POWER SOURCES, 2005, 145 (02) : 428 - 434
  • [40] FABRICATION AND PROPERTIES OF AN ANODE-SUPPORTED TUBULAR IT-SOFC BASED ON LANTHANUM GALLATE
    Sammes, Nigel
    Du, Yanhai
    ADVANCES IN SOLID OXIDE FUEL CELLS, 2005, 26 (04): : 33 - 40
12345