Tubular Metal Supported SOFC Development for Domestic Power Generation

被引：16

作者：

Villarreal, I. ^{[1
]}

Rivas, M. ^{[1
]}

Rodriguez-Martinez, L. M. ^{[1
]}

Otaegi, L. ^{[1
]}

Zabala, A. ^{[1
]}

Gomez, N. ^{[1
]}

Alvarez, M. A. ^{[1
]}

Antepara, I. ^{[1
]}

Arizmendiarrieta, N. ^{[1
]}

Manzanedo, J. ^{[1
]}

Olave, M. ^{[1
]}

Urriolabeitia, A. ^{[1
]}

Burgos, N. ^{[2
]}

Castro, F. ^{[2
]}

Laresgoiti, A. ^{[1
]}

机构：

[1] Ikerlan, Parque Tecnol Alava,Juan de la Cierva 1, Minano 01510, Spain

[2] CEIT, San Sebastian, Spain

来源：

SOLID OXIDE FUEL CELLS 11 (SOFC-XI) | 2009年 / 25卷 / 02期

关键词：

D O I：

10.1149/1.3205583

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Tubular metal supported SOFC technology has successfully been developed over the past years with the aim at domestic CHP systems below 3 kWe. The basic cell structure consists of a metal porous support, a protective barrier layer, an anode and an electrolyte cofired at 1350 degrees C. Cathode and contacting layers are subsequently sintered at lower temperatures. Latest achievements include average cell performances of 400 mW/cm(2) at 0.7 V and 800 degrees C, over 350 thermal cycles and more than 1500 hours of steady operation. Several stack concepts are currently being tested and BoP components such as fuel processing, power electronics and control system developed in parallel to achieve a successful micro-CHP proof of concept by the end of 2010.

引用

页码：689 / 694

页数：6

共 50 条

[1] Degradation Studies on Tubular Metal Supported SOFC
Rodriguez-Martinez, L. M.
Otaegi, L.
Alvarez, M. A.
Rivas, M.
Gomez, N.
Zabala, A.
Arizmendiarrieta, N.
Antepara, I.
Olave, M.
Urriolabeitia, A.
Villarreal, I.
Laresgoiti, A.
SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 745 - 752
[2] Development of Anode Supported Tubular SOFC Components
Seabaugh, M. M.
Day, M. J.
Cummings, S. R.
Miller, A. C.
Menzer, S. G.
SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 629 - 634
[3] Metal-Supported SOFC development at JPOWER
Sakuno, Shinichi
Takahashi, Shuuichi
Sasatsu, Hiroshi
SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 731 - 737
[4] Development of Anode Supported Micro-Tubular SOFC Stack for APU Application
Lee, Seung-Bok
Yun, Ki-Seok
Lim, Tak-Hyoung
Song, Rak-Hyun
Shin, Dong-Ryul
SOLID OXIDE FUEL CELLS 10 (SOFC-X), PTS 1 AND 2, 2007, 7 (01): : 187 - 191
[5] Engineering FEA Sintering Model Development for Metal Supported SOFC
Chatzimichail, R.
Dawson, R.
Green, S.
Sullivan, D.
Mukerjee, S.
Selby, M.
SOLID OXIDE FUEL CELLS 15 (SOFC-XV), 2017, 78 (01): : 2773 - 2783
[6] Development of Planar Metal Supported SOFC with Novel Cermet Anode
Blennow, Peter
Hjelm, Johan
Klemenso, Trine
Persson, Asa
Brodersen, Karen
Srivastava, Akhilesh Kumar
Frandsen, Henrik Lund
Lundberg, Mats
Ramousse, Severine
Mogensen, Mogens
SOLID OXIDE FUEL CELLS 11 (SOFC-XI), 2009, 25 (02): : 701 - 710
[7] The status of metal-supported SOFC development and industrialization at Plansee
Franco, Th
Haydn, M.
Weber, A.
Schafbauer, W.
Blum, L.
Packbier, U.
Roehrens, D.
Menzler, N. H.
Rechberger, J.
Venskutonis, A.
Sigl, L. S.
Buchkremer, H. -P.
SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 471 - 480
[8] POWER GENERATION PROPERTIES OF A MICRO TUBULAR SOFC BUNDLE UNDER PRESSURIZED CONDITIONS
Hashimoto, S.
Liu, Y.
Asano, K.
Mori, M.
Funahashi, Y.
Fujishiro, Y.
PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY - 2008, 2008, : 211 - 214
[9] SOFC Technology Development for Distributed and Centralized Power Generation
Ghezel-Ayagh, Hossein
Jolly, Stephen
Patel, Dilip
Nagar, Jacob
Davis, Keith
Willman, Carl
Howard, Chris
Lukas, Mikael
Tang, Eric
Pastula, Michael
Petri, Randy
FUEL CELL SEMINAR 2012, 2013, 51 (01): : 87 - 94
[10] Development of SOFC power generation module with high electrical generation efficiency
Yoshida, Yoshiteru
Hayashi, Katsuya
Yokoo, Masayuki
NTT Technical Review, 2011, 9 (02):

← 1 2 3 4 5 →