Application of MCDM Method for the Selection of Optimum Process Parameters in Turning Process

被引：14
|
作者：
Singaravel, B. [1 ]
Shankar, D. Prabhu [1 ]
Prasanna, Lakshmi [1 ]
机构：
[1] Vignan Inst Tehnol & Sci, Mech Engn Dept, Hyderabad 508284, Telangana, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 05期
关键词：
Turning; AISI; 4340; steel; process parameters and ARAS; MACHINING PARAMETERS; CUTTING CONDITIONS; SURFACE INTEGRITY; INCONEL; 718; OPTIMIZATION;
D O I：
10.1016/j.matpr.2018.02.341
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Turning process is one of the fundamental machining operations and its parameters optimization leads to better machining performance. This study applies Additive Ratio Assessment (ARAS) method to determine the optimum process parameters and suitable coated tool in turning operation of AISI 4340 steel. The process parameters considered are cutting speed, feed rate, depth of cut and coated tools. The objective is to minimize surface roughness, micro hardness and maximize Material Removal Rate (MRR) simultaneously. The result revealed that this proposed method is appropriate for solving multi criteria optimization of process parameters. (C) 2017 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Materials Manufacturing and Modelling (ICMMM - 2017).
引用
收藏
页码：13464 / 13471
页数：8
相关论文
共 50 条
  • [31] Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process
    Ghaleb, Atef M.
    Kaid, Husam
    Alsamhan, Ali
    Mian, Syed Hammad
    Hidri, Lotfi
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [32] SELECTION OF ADSORPTION PROCESS PARAMETERS
    NEMETH, ES
    ROMANKOV, PG
    FROLOV, VF
    JOURNAL OF APPLIED CHEMISTRY OF THE USSR, 1982, 55 (08): : 1647 - 1652
  • [33] Selection of welding process parameters for the optimum butt-joint strength of an aluminum alloy
    Kumar, A.
    Sundarrajan, S.
    MATERIALS AND MANUFACTURING PROCESSES, 2006, 21 (08) : 779 - 782
  • [34] OPTIMIZATION OF HARD TURNING PROCESS PARAMETERS WITH PCBN TOOL BASED ON THE TAGUCHI METHOD
    Puh, Franko
    Segota, Toni
    Jurkovic, Zoran
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2012, 19 (02): : 415 - 419
  • [35] OPTIMUM SELECTION OF GRINDING PARAMETERS USING PROCESS MODELING AND KNOWLEDGE BASED SYSTEM APPROACH
    MIDHA, PS
    ZHU, CB
    TRMAL, GJ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1991, 28 (1-2) : 189 - 198
  • [36] Parameters Optimization of Turning Process under Extended Carbon Emissions Accounting Method
    Liu Z.
    Zheng D.
    Guo Y.
    Xiao Z.
    Wang Q.
    Recent Patents on Mechanical Engineering, 2023, 16 (02) : 118 - 128
  • [37] Optimization of hard turning process parameters with PCBN tool based on the Taguchi method
    Optimizacija parametara procesa tvrdog tokarenja PCBN alatnim pločicama temeljem Taguchijeve metode
    Puh, F. (franko.puh@uljanik.hr), 1600, Strojarski Facultet (19):
  • [38] Optimum selection of sand control method using a combination of MCDM and DOE techniques
    Shahsavari, Mohammad Hossein
    Khamehchi, Ehsan
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2018, 171 : 229 - 241
  • [39] Computer-aided selection of optimum machining parameters in multipass turning
    Mesquita, Ruy, 1600, (Springer-Verlag London Ltd., London, United Kingdom):
  • [40] Optimizing Machining Parameters during Turning Process
    Abdulkareem, Suleiman
    Rumah, Usman Jibrin
    Adaokoma, Apasi
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2011, 3 (01): : 23 - 27
12345