Application of MCDM Method for the Selection of Optimum Process Parameters in Turning Process

被引：14

作者：

Singaravel, B. ^{[1
]}

Shankar, D. Prabhu ^{[1
]}

Prasanna, Lakshmi ^{[1
]}

机构：

[1] Vignan Inst Tehnol & Sci, Mech Engn Dept, Hyderabad 508284, Telangana, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 05期

关键词：

Turning; AISI; 4340; steel; process parameters and ARAS; MACHINING PARAMETERS; CUTTING CONDITIONS; SURFACE INTEGRITY; INCONEL; 718; OPTIMIZATION;

D O I：

10.1016/j.matpr.2018.02.341

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Turning process is one of the fundamental machining operations and its parameters optimization leads to better machining performance. This study applies Additive Ratio Assessment (ARAS) method to determine the optimum process parameters and suitable coated tool in turning operation of AISI 4340 steel. The process parameters considered are cutting speed, feed rate, depth of cut and coated tools. The objective is to minimize surface roughness, micro hardness and maximize Material Removal Rate (MRR) simultaneously. The result revealed that this proposed method is appropriate for solving multi criteria optimization of process parameters. (C) 2017 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Materials Manufacturing and Modelling (ICMMM - 2017).

引用

页码：13464 / 13471

页数：8

共 50 条

[21] Application of the Taguchi method for surface roughness predictions in the turning process
Ozturk, Sabri
MATERIALS TESTING, 2016, 58 (09) : 782 - 787
[22] Probabilistic hesitant fuzzy set based MCDM method with applications in Portfolio selection process
Joshi, Dheeraj Kumar
Awasthi, Natasha
Chaube, Shshank
MATERIALS TODAY-PROCEEDINGS, 2022, 57 : 2270 - 2275
[23] Optimization of Cutting Parameters in Turning Process
Bhuiyan, Tanveer Hossain
Ahmed, Imtiaz
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2014, 7 (01) : 233 - 239
[24] Application of Desirability Function Analysis and Utility Concept for Selection of Optimum Cutting Parameters in Turning Operation
Singaravel, B.
Selvaraj, T.
JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2016, 15 (01) : 1 - 11
[25] Optimisation of machining and geometrical parameters in turning process using Taguchi method
Senthilkumar, N.
Ganapathy, T.
Tamizharasan, T.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2014, 12 (02) : 233 - 246
[26] OPTIMUM PROCESS PARAMETERS FOR COMPOSTING SLUDGE
HOITINK, HAJ
KUTER, GA
KIPP, CE
OHIO REPORT ON RESEARCH AND DEVELOPMENT, 1984, 69 (03): : 35 - 36
[27] DETERMINING OPTIMUM CUTTING PROCESS PARAMETERS
NIKITIN, BV
SOVIET ENGINEERING RESEARCH, 1985, 5 (12): : 65 - 69
[28] OPTIMUM PROCESS PARAMETERS FOR COMPOSTING SLUDGE
HOITINK, HAJ
KUTER, GA
KIPP, CE
BIOCYCLE, 1984, 25 (06) : 39 - 40
[29] Selection of optimal hot extrusion process parameters for AA6061using hybrid MCDM technique
Jajimoggala, Sarojini
Krishna, Murali N.
Syed, Kamaluddin
MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 278 - 290
[30] Societal Application of Taguchi Method for Optimization of Process Parameters in the Melting Process in the Foundry
Deshmukh, Ranjitsinh
Hiremath, Rahul
TECHNO-SOCIETAL 2018: PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES FOR SOCIETAL APPLICATIONS - VOL 2, 2020, : 215 - 221

← 1 2 3 4 5 →