Application of MCDM Method for the Selection of Optimum Process Parameters in Turning Process

被引：14
|
作者：
Singaravel, B. [1 ]
Shankar, D. Prabhu [1 ]
Prasanna, Lakshmi [1 ]
机构：
[1] Vignan Inst Tehnol & Sci, Mech Engn Dept, Hyderabad 508284, Telangana, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 05期
关键词：
Turning; AISI; 4340; steel; process parameters and ARAS; MACHINING PARAMETERS; CUTTING CONDITIONS; SURFACE INTEGRITY; INCONEL; 718; OPTIMIZATION;
D O I：
10.1016/j.matpr.2018.02.341
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Turning process is one of the fundamental machining operations and its parameters optimization leads to better machining performance. This study applies Additive Ratio Assessment (ARAS) method to determine the optimum process parameters and suitable coated tool in turning operation of AISI 4340 steel. The process parameters considered are cutting speed, feed rate, depth of cut and coated tools. The objective is to minimize surface roughness, micro hardness and maximize Material Removal Rate (MRR) simultaneously. The result revealed that this proposed method is appropriate for solving multi criteria optimization of process parameters. (C) 2017 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Materials Manufacturing and Modelling (ICMMM - 2017).
引用
收藏
页码：13464 / 13471
页数：8
相关论文
共 50 条
  • [1] MCDM Model for selection of optimum machining process
    Srinivasan, Sriram
    Srivatsan, L.
    Sathyanarayan, R.
    Ramnath, B. Vijaya
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XV, 2014, 773-774 : 348 - +
  • [2] The selection of optimum process parameters on A319 aluminum alloy in friction stir welding MCDM method
    Marichamy, M.
    Babu, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 228 - 231
  • [3] Evaluation of Optimum Turning Process of Process Parameters Using DOE and PCA Taguchi Method
    Madhavi, S. Krishna
    Sreeramulu, D.
    Venkatesh, M.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 1937 - 1946
  • [4] Selection of optimum psychological communication dyad strategies based on a Fuzzy MCDM process
    Liu Fangyi
    Hung Yi-Jung
    INTERNATIONAL JOURNAL OF PSYCHOLOGY, 2008, 43 (3-4) : 620 - 620
  • [5] Application of MCDM based hybrid optimization of WEDM process parameters
    Sreeraj, P.
    Kumaran, S. Thirumalai
    Kumar, S. Suresh
    Uthayakumar, M.
    Pethuraj, M.
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 1186 - 1192
  • [6] Optimal selection of process parameters for turning operations in a CAPP system
    Prasad, AVSRK
    Rao, PN
    Rao, URK
    INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1997, 35 (06) : 1495 - 1522
  • [7] Application of the CBR method for adding the process of cutting tools and parameters selection
    Ociepka, P.
    Herbus, K.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING IV, PTS 1-7, 2016, 145
  • [8] Application of CBR method for adding the process of cutting tools and parameters selection
    Ociepka, P.
    Herbus, K.
    MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING (MODTECH2015), 2015, 95
  • [9] Selection of optimum process parameters for manufacture of polypropylene sewing thread
    Sakhnik, MV
    Rodionov, VA
    FIBRE CHEMISTRY, 2004, 36 (02) : 109 - 111
  • [10] Selection of Optimum Process Parameters for Manufacture of Polypropylene Sewing Thread
    M. V. Sakhnik
    V. A. Rodionov
    Fibre Chemistry, 2004, 36 : 109 - 111
12345