Wear model in turning of hardened steel with PCBN tool

被引：25

作者：

Camargo, Jose C. ^{[1
]}

Dominguez, Dany Sanchez ^{[1
]}

Ezugwu, Emmanuel O. ^{[2
]}

Machado, Alisson R. ^{[3
]}

机构：

[1] Univ Estadual Santa Cruz, Sch Mech Engn, Lab Mfg, BR-45662900 Ilheus, BA, Brazil

[2] Nigerian Air Force Base, Air Force Inst Technol, Kaduna, Nigeria

[3] Univ Fed Uberlandia, Sch Mech Engn, Lab Teaching & Res Machining, BR-38408100 Santa Monica, MG, Brazil

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2014年 / 47卷

关键词：

Tool wear model; AISI D6 steel; PCBN tool; Hard turning;

D O I：

10.1016/j.ijrmhm.2014.06.019

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study a mathematical-computational model of tool wear of PCBN (polycrystalline cubic boron nitride) was developed in turning of quenched and tempered AISI D6 steel (57 HRC) using experimental planning and statistic techniques. On the experimental trials many parameters are important such as: surface roughness, cutting force and tool wear. These parameters were evaluated according to their statistical significance using Statistica (R) and Matlab (R) softwares. Through a multiple-regression analysis, it was possible to establish a mathematical model for estimating tool wear as a function of the cutting parameters. This model enhanced estimation of the ideal cutting conditions for turning hardened steel, i.e., those that generate minimum damage on the PCBN tool without compromising productivity. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：61 / 70

页数：10

共 50 条

[21] PCBN tool wear modes and mechanisms in finish hard turning
Lahiff, Cora
Gordon, Seamus
Phelan, Pat
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2007, 23 (06) : 638 - 644
[22] High precision cutting technology of hardened steel with PCBN tool
Wakabayashi, T
Yoshida, K
Harada, T
PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY, 2000, : 239 - 243
[23] Evaluation of the performance of a PCBN tool in turning AISI D2 hardened steel in continuous and interrupted cutting
Dias, Ernane Felipe
Barroso, Caio Cesar Goncalves Coutinho
Silva, Sandro da Costa
Shigaki, Yukio
Santos, Sandro Cardoso
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 134 (11-12): : 5657 - 5666
[24] Prediction of Tool Wear Using Artificial Neural Networks during Turning of Hardened Steel
Twardowski, Pawel
Wiciak-Pikula, Martyna
MATERIALS, 2019, 12 (19)
[25] Correlation Analysis between Tool Wear, Roughness and Cutting Vibration in Turning of Hardened Steel
Abidi Y.
Boulanouar L.
Abidi, Youcef (abidiyoucef73@gmail.com), 1600, Polska Akademia Nauk (69): : 403 - 421
[26] The effects of tool/workpiece interface temperature on tool wear and cutting performance when turning and high speed end milling, hardened steel using PCBN and conventional ceramic tooling
Dewes, RC
Abrao, AM
Aspinwall, DK
ADVANCES IN HARD MATERIALS PRODUCTION, 1996, : 479 - 486
[27] Thermal Phenomena on the Front Surface of Tools with PcBN during Turning of Hardened Steel
S. A. Klymenko
S. An. Klymenko
M. Yu. Kopіeіkina
A. S. Manokhin
Yu. O. Melniychuk
Journal of Superhard Materials, 2023, 45 : 388 - 398
[28] Thermal Phenomena on the Front Surface of Tools with PcBN during Turning of Hardened Steel
Klymenko, S. A.
Klymenko, S. An.
Kopieikina, M. Yu.
Manokhin, A. S.
Melniychuk, Yu. O.
JOURNAL OF SUPERHARD MATERIALS, 2023, 45 (05) : 388 - 398
[29] Using pulse laser processing to shape cutting edge of PcBN tool for high-precision turning of hardened steel
1600, Fuji Technology Press (07):
[30] Effect of cutting edge modification on the tool flank wear in ultrasonically assisted turning of hardened steel
Farahnakian, Masoud
Keshavarz, Mohamad Ebrahim
Elhami, Sadegh
Razfar, Mohammad Reza
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (05) : 1472 - 1482

← 1 2 3 4 5 →