Wear model in turning of hardened steel with PCBN tool

被引：25
|
作者：
Camargo, Jose C. [1 ]
Dominguez, Dany Sanchez [1 ]
Ezugwu, Emmanuel O. [2 ]
Machado, Alisson R. [3 ]
机构：
[1] Univ Estadual Santa Cruz, Sch Mech Engn, Lab Mfg, BR-45662900 Ilheus, BA, Brazil
[2] Nigerian Air Force Base, Air Force Inst Technol, Kaduna, Nigeria
[3] Univ Fed Uberlandia, Sch Mech Engn, Lab Teaching & Res Machining, BR-38408100 Santa Monica, MG, Brazil
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2014年 / 47卷
关键词：
Tool wear model; AISI D6 steel; PCBN tool; Hard turning;
D O I：
10.1016/j.ijrmhm.2014.06.019
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study a mathematical-computational model of tool wear of PCBN (polycrystalline cubic boron nitride) was developed in turning of quenched and tempered AISI D6 steel (57 HRC) using experimental planning and statistic techniques. On the experimental trials many parameters are important such as: surface roughness, cutting force and tool wear. These parameters were evaluated according to their statistical significance using Statistica (R) and Matlab (R) softwares. Through a multiple-regression analysis, it was possible to establish a mathematical model for estimating tool wear as a function of the cutting parameters. This model enhanced estimation of the ideal cutting conditions for turning hardened steel, i.e., those that generate minimum damage on the PCBN tool without compromising productivity. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：61 / 70
页数：10
相关论文
共 50 条
  • [1] PCBN tool wear mechanism in hard turning hardened bearing steel
    Dai, S. J.
    Wen, D. H.
    Yuan, J. L.
    ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 334 - 338
  • [2] PCBN tool wear mechanism in interrupted hard turning SAE8822 hardened steel
    Xiao, L.
    Zeng, N. X.
    Wen, D. H.
    Wu, H. H.
    Si, B. H.
    ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 329 - 333
  • [3] Influences of chamfer angle of PCBN cutting tool on the cutting forces and tool wear in dry turning hardened steel
    Tong, Yanjiao
    Zhang, Hongtao
    Li, Man
    Dong, Hai
    Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, 2007, (02): : 66 - 68
  • [4] Study on precision hard turning hardened bearing steel with PCBN tool
    Wen, Donghui
    Liu, Xianli
    Xiao, Lu
    Yan, Fugang
    Hangkong Zhizao Jishu/Aeronautical Manufacturing Technology, 2002, (06):
  • [5] Wear performance and mechanisms of PCBN tool in dry hard turning of AISI D2 hardened steel
    Tang, Linhu
    Sun, Yongji
    Li, Baodong
    Shen, Jiancheng
    Meng, Guoliang
    TRIBOLOGY INTERNATIONAL, 2019, 132 : 228 - 236
  • [6] Tool wear, cutting forces and temperature evaluation when turning hardened bearing steel using PCBN and ceramic tool materials
    Abrao, A.M.
    Aspinwall, D.K.
    Wise, M.L.H.
    1995,
  • [7] Wear behaviors of PCBN tools in interrupted turning hardened steel with tool's chamfer angle and edge preparation considered
    Li, Yong
    Kou, Zili
    Liu, Shenzhuo
    Zhang, Rui
    Liu, Pingping
    Liu, Fangming
    Yin, Wenwen
    Yin, Shuai
    Zou, Jianlai
    MATERIALS SCIENCE AND PROCESSING, ENVIRONMENTAL ENGINEERING AND INFORMATION TECHNOLOGIES, 2014, 665 : 3 - 10
  • [8] The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting tools
    Poulachon, G
    Bandyopadhyay, BP
    Jawahir, IS
    Pheulpin, S
    Seguin, E
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (02): : 139 - 144
  • [9] Experimental Study on Hard Turning Hardened GCr15 Steel with PCBN Tool
    LIU Xian-li 1
    2. Dept. of Precision Instrunments & Mechano logy
    厦门大学学报(自然科学版), 2002, (S1) : 125 - 126
  • [10] Experimental study on hard turning hardened GCr15 steel with PCBN tool
    Liu, XL
    Wen, DH
    Li, ZJ
    Xiao, L
    Yan, FG
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 217 - 221
12345