Effects of pH value on characteristics of oxide films on 316L stainless steel in Zn-injected borated and lithiated high temperature water

被引：54
|
作者：
Liu, Xiahe
Han, En-Hou [1 ]
Wu, Xinqiang
机构：
[1] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China
来源：
CORROSION SCIENCE | 2014年 / 78卷
关键词：
Stainless steel; Zinc; Polarization; XPS; High temperature corrosion; Oxidation; REVISED POURBAIX DIAGRAMS; CORROSION BEHAVIOR; ELECTROCHEMICAL PROPERTIES; ALLOY; 690; 304-STAINLESS-STEEL; ZINC; SOLUBILITY; IMPEDANCE; CONSTANT; HYDROGEN;
D O I：
10.1016/j.corsci.2013.09.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of pH values from 6.9 to 7.4 on oxide films for 316L stainless steel in borated and lithiated high temperature water at 573.15 K without and with Zn injection were examined by in situ potentiodynamic polarization curves, electrochemical impedance spectra and ex situ X-ray photoelectron spectroscopy (XPS) analysis. The composition of oxide films appears slightly pH dependent: rich in chromites and ferrites at pH = 6.9 and pH = 7.4, respectively. The corrosion rate decreases significantly in the high pH value solution with Zn injection due to the formation of compact oxide films. The solubilities and structural model of oxides are proposed and discussed. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：200 / 207
页数：8
相关论文
共 50 条
  • [31] Investigation of oxide film formation on 316L stainless steel in high-temperature aqueous environments
    Cheng, Xuequn
    Feng, Zhicao
    Li, Chengtao
    Dong, Chaofang
    Li, Xiaogang
    ELECTROCHIMICA ACTA, 2011, 56 (17) : 5860 - 5865
  • [32] Radiolysis driven changes to oxide stability during irradiation-corrosion of 316L stainless steel in high temperature water
    Raiman, Stephen S.
    Bartels, David M.
    Was, Gary S.
    JOURNAL OF NUCLEAR MATERIALS, 2017, 493 : 40 - 52
  • [33] High temperature oxidation behavior of TiC/316L stainless steel composites
    School of Mechanic and Electric Engineering, Hubei Polytechnic University, Huangshi 435003, China
    不详
    Han, X. (jiang1091147@126.com), 2013, Central South University, Lushan Nanlu, Changsha, 410043, China (18):
  • [34] Densification behavior of 316L stainless steel powder under high temperature
    Pohang Univ of Science and, Technology, Pohang, Korea, Republic of
    Mater Sci Eng A Struct Mater Prop Microstruct Process, 1 (64-71):
  • [35] Densification behavior of 316L stainless steel powder under high temperature
    Kim, KT
    Jeon, YC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 245 (01): : 64 - 71
  • [36] Effects of irradiation temperature on tritium retention in stainless steel type 316L
    Matsuyama, Masao
    Zushi, Hideki
    Hanada, Kazuaki
    Oya, Yasuhisa
    Hatano, Yuji
    FUSION ENGINEERING AND DESIGN, 2021, 169
  • [37] Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water
    Zhu, Ruolin
    Wang, Jianqiu
    Zhang, Zhiming
    Han, En-Hou
    CORROSION SCIENCE, 2017, 120 : 219 - 230
  • [38] Influence of sigma phase on corrosion behavior of 316L stainless steel in high temperature and high pressure water
    Ding, Jie
    Han, En-Hou
    Zhang, Zhiming
    Wang, Siyan
    Wang, Jianqiu
    MATERIALS AT HIGH TEMPERATURES, 2017, 34 (01) : 78 - 86
  • [39] Effect of electropolishing on corrosion of nuclear grade 316L stainless steel in deaerated high temperature water
    Han, Yaolei
    Mei, Jinna
    Peng, Qunjia
    Han, En-Hou
    Ke, Wei
    CORROSION SCIENCE, 2016, 112 : 625 - 634
  • [40] Influence of Zn on the oxide layer on AISI 316L(NG) stainless steel in simulated pressurised water reactor coolant
    Betova, Iva
    Bojinov, Martin
    Kinnunen, Petri
    Lundgren, Klas
    Saario, Tirno
    ELECTROCHIMICA ACTA, 2009, 54 (03) : 1056 - 1069
12345