Effects of pH value on characteristics of oxide films on 316L stainless steel in Zn-injected borated and lithiated high temperature water

被引：54
|
作者：
Liu, Xiahe
Han, En-Hou [1 ]
Wu, Xinqiang
机构：
[1] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China
来源：
CORROSION SCIENCE | 2014年 / 78卷
关键词：
Stainless steel; Zinc; Polarization; XPS; High temperature corrosion; Oxidation; REVISED POURBAIX DIAGRAMS; CORROSION BEHAVIOR; ELECTROCHEMICAL PROPERTIES; ALLOY; 690; 304-STAINLESS-STEEL; ZINC; SOLUBILITY; IMPEDANCE; CONSTANT; HYDROGEN;
D O I：
10.1016/j.corsci.2013.09.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of pH values from 6.9 to 7.4 on oxide films for 316L stainless steel in borated and lithiated high temperature water at 573.15 K without and with Zn injection were examined by in situ potentiodynamic polarization curves, electrochemical impedance spectra and ex situ X-ray photoelectron spectroscopy (XPS) analysis. The composition of oxide films appears slightly pH dependent: rich in chromites and ferrites at pH = 6.9 and pH = 7.4, respectively. The corrosion rate decreases significantly in the high pH value solution with Zn injection due to the formation of compact oxide films. The solubilities and structural model of oxides are proposed and discussed. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：200 / 207
页数：8
相关论文
共 50 条
  • [21] Effect of grain boundary engineering on corrosion fatigue behavior of 316LN stainless steel in borated and lithiated high-temperature water
    Gao, Jun
    Tan, Jibo
    Wu, Xinqiang
    Xia, Shuang
    CORROSION SCIENCE, 2019, 152 : 190 - 201
  • [22] Oxidation of injection molding 316L stainless steel at high temperature
    Sobral, AVC
    Hierro, MP
    Pérez, FJ
    Ristow, W
    Franco, CV
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2000, 51 (11): : 791 - 796
  • [23] Investigation into Friction and Wear Characteristics of 316L Stainless-Steel Wire at High Temperature
    Huang, Mingji
    Fu, Yili
    Qiao, Xiaoxi
    Chen, Ping
    MATERIALS, 2023, 16 (01)
  • [24] Effects of Strain Rate and Temperature on Shear Properties and Fracture Characteristics of 316L Stainless Steel
    Lee, Woei-Shyan
    Chen, Tao-Hsing
    Lin, Chi-Feng
    Li, Zong-Yun
    MATERIALS TRANSACTIONS, 2012, 53 (03) : 469 - 476
  • [25] Low-cycle fatigue behaviors of 316L austenitic stainless steels with different surface finishing in simulated pressurized water reactor primary water and an oxygenated, borated, lithiated high temperature water
    Xiong, Yida
    Watanabe, Yutaka
    Shibayama, Yuki
    Zhong, Xiangyu
    Mary, Nicolas
    CORROSION SCIENCE, 2021, 190
  • [26] Effects of chloride and oxygen on stress corrosion cracking of cold worked 316/316L austenitic stainless steel in high temperature water
    Du, Donghai
    Chen, Kai
    Lu, Hui
    Zhang, Lefu
    Shi, Xiuqiang
    Xu, Xuelian
    Andresen, Peter L.
    CORROSION SCIENCE, 2016, 110 : 134 - 142
  • [27] Influence of pH on the chemical and structural properties of the oxide films formed on 316L stainless steel, alloy 600 and alloy 690 in high temperature aqueous environments
    Dupin, M
    Gosser, P
    Walls, MG
    Rondot, B
    Pastol, JL
    Faty, S
    Ferreira, MGS
    Belo, MDC
    ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2002, 27 (01): : 19 - 32
  • [28] Influence of pH on properties of oxide films formed on type 316L stainless steel, alloy 600, and alloy 690 in high-temperature aqueous environments
    Montemor, MF
    Ferreira, MGS
    Walls, M
    Rondot, B
    Belo, MC
    CORROSION, 2003, 59 (01) : 11 - 21
  • [29] The Influence of pH on Type 316L Stainless Steel in Simulated Circulating Cooling Water
    Liu, Zuojia
    Cheng, Xuequn
    Li, Xiaogang
    MATERIALS PERFORMANCE, 2010, 49 (12) : 64 - 68
  • [30] Effects of welding on the passive oxide film of electropolished 316L stainless steel
    Trigwell, S
    Selvaduray, G
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 166 (01) : 30 - 43
12345