Effects of pH value on characteristics of oxide films on 316L stainless steel in Zn-injected borated and lithiated high temperature water

被引：54
|
作者：
Liu, Xiahe
Han, En-Hou [1 ]
Wu, Xinqiang
机构：
[1] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China
来源：
CORROSION SCIENCE | 2014年 / 78卷
关键词：
Stainless steel; Zinc; Polarization; XPS; High temperature corrosion; Oxidation; REVISED POURBAIX DIAGRAMS; CORROSION BEHAVIOR; ELECTROCHEMICAL PROPERTIES; ALLOY; 690; 304-STAINLESS-STEEL; ZINC; SOLUBILITY; IMPEDANCE; CONSTANT; HYDROGEN;
D O I：
10.1016/j.corsci.2013.09.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of pH values from 6.9 to 7.4 on oxide films for 316L stainless steel in borated and lithiated high temperature water at 573.15 K without and with Zn injection were examined by in situ potentiodynamic polarization curves, electrochemical impedance spectra and ex situ X-ray photoelectron spectroscopy (XPS) analysis. The composition of oxide films appears slightly pH dependent: rich in chromites and ferrites at pH = 6.9 and pH = 7.4, respectively. The corrosion rate decreases significantly in the high pH value solution with Zn injection due to the formation of compact oxide films. The solubilities and structural model of oxides are proposed and discussed. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：200 / 207
页数：8
相关论文
共 50 条
  • [1] Effect of Zn injection on established surface oxide films on 316 L stainless steel in borated and lithiated high temperature water
    Liu, Xiahe
    Wu, Xinqiang
    Han, En-Hou
    CORROSION SCIENCE, 2012, 65 : 136 - 144
  • [2] Electrochemical and surface analytical investigation of the effects of Zn concentrations on characteristics of oxide films on 304 stainless steel in borated and lithiated high temperature water
    Liu, Xiahe
    Wu, Xinqiang
    Han, En-Hou
    ELECTROCHIMICA ACTA, 2013, 108 : 554 - 565
  • [3] Influence of Zn injection on characteristics of oxide film on 304 stainless steel in borated and lithiated high temperature water
    Liu, Xiahe
    Wu, Xinqiang
    Han, En-Hou
    CORROSION SCIENCE, 2011, 53 (10) : 3337 - 3345
  • [4] EFFECTS OF TEMPERATURE ON LECTROCHEMICAL CORROSION OF DOMESTIC NUCLEAR-GRADE 316L STAINLESS STEEL IN Zn-INJECTED AQUEOUS ENVIRONMENT
    Liu Xiahe
    Wu Xinqiang
    Han En-hou
    ACTA METALLURGICA SINICA, 2014, 50 (01) : 64 - 70
  • [5] Investigation of the corrosion behavior of 304L and 316L stainless steels at high-temperature borated and lithiated water
    Duan, Zhengang
    Arjmand, Farzin
    Zhang, Lefu
    Abe, Hiroaki
    JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 2016, 53 (09) : 1435 - 1446
  • [6] Influence of Zn on oxide films on Alloy 690 in borated and lithiated high temperature water
    Huang, Junbo
    Liu, Xiahe
    Han, En-Hou
    Wu, Xinqiang
    CORROSION SCIENCE, 2011, 53 (10) : 3254 - 3261
  • [7] Effect of pH on corrosion behavior of 316L stainless steel in hydrogenated high temperature water
    Wang, Jiazhen
    Wang, Jianqiu
    Ming, Hongliang
    Zhang, Zhiming
    Han, En-Hou
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2018, 69 (05): : 580 - 589
  • [8] Oxide growth and dissolution on 316L stainless steel during irradiation in high temperature water
    Hanbury, Rigel D.
    Was, Gary S.
    CORROSION SCIENCE, 2019, 157 : 305 - 311
  • [9] High temperature deformation of 316L stainless steel
    Cabrera, ESP
    MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (02) : 155 - 161
  • [10] Accelerated corrosion and oxide dissolution in 316L stainless steel irradiated in situ in high temperature water
    Raiman, Stephen S.
    Was, Gary S.
    JOURNAL OF NUCLEAR MATERIALS, 2017, 493 : 207 - 218
12345