2D Finite Element Model and Microstructural Changes During Cutting of Ti6Al4V in Dry Condition

被引：1
|
作者：
Imbrogno, Stano [1 ]
Rinaldi, Sergio [1 ]
Seara, Borja [2 ]
Arrazola, Pedro J. [2 ]
Rotella, Giovanna [1 ]
Umbrello, Domenico [1 ]
机构：
[1] Univ Calabria, Dept Mech Energy & Management Engn, Via P Bucci Cubo 46c, I-87036 Arcavacata Di Rende, Italy
[2] Mondragon Univ, Mfg Dept, Arrasate Mondragon 20500, Spain
来源：
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) | 2016年 / 1769卷
关键词：
TI-6AL-4V ALLOY; DEFORMATION; STRESS;
D O I：
10.1063/1.4963485
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The main objective of this study is to develop a FE model of the orthogonal cutting process executed on Titanium alloy (Ti6Al4V) under dry condition. In detail, the Abaqus/Explicit 2D formulation has been used to simulate the process and the results provided ( temperature and strain rate) where employed to calculate the microstructural and hardness changes on surface and sub-surface. The quantitative analysis in terms of the grain refinement and hardness variation during the cutting process has been provided taking into account the Zener-Hollomon and Hall-Petch equations. The obtained results were compared with the experimental outcomes in order to understand the reliable rate of the model.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Microstructural Investigation Of Ti Coating On Ti6al4v By Laser Cladding
    Sobiyi, Kehinde
    Akinlabi, Esther
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 244 - 249
  • [42] The role of material model in the finite element simulation of high-speed machining of Ti6Al4V
    Gao, Chong-Yang
    Zhang, Liang-Chi
    Liu, Peng-Hui
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (17) : 2959 - 2967
  • [43] Cutting parameters influence on surface integrity of dry-turned Ti6Al4V alloy
    Martin-Bejar, Sergio
    Trujillo Vilches, Francisco Javier
    Herrera Fernandez, Manuel
    Bermudo Gamboa, Carolina
    Sevilla Hurtado, Lorenzo
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2024, 238 (02) : 245 - 262
  • [44] Prediction of the cutting forces and chip morphology when machining the Ti6Al4V alloy using a microstructural coupled model
    Yameogo, D.
    Haddag, B.
    Makich, H.
    Nouari, M.
    16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 : 335 - 340
  • [45] Numerical analysis of constitutive coefficients effects on FE simulation of the 2D orthogonal cutting process: application to the Ti6Al4V
    Yaich, M.
    Ayed, Y.
    Bouaziz, Z.
    Germain, G.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (1-4): : 283 - 303
  • [46] Numerical analysis of constitutive coefficients effects on FE simulation of the 2D orthogonal cutting process: application to the Ti6Al4V
    M. Yaich
    Y. Ayed
    Z. Bouaziz
    G. Germain
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 283 - 303
  • [47] Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
    Jinyang Xu
    Mohamed El Mansori
    Ming Chen
    Fei Ren
    The International Journal of Advanced Manufacturing Technology, 2019, 103 : 3831 - 3851
  • [48] Effects of oxygen on cutting process in machining Ti6Al4V
    Wang, Hui
    Ni, Fusheng
    Gu, Lei
    MODERN TECHNOLOGIES IN MATERIALS, MECHANICS AND INTELLIGENT SYSTEMS, 2014, 1049 : 69 - 72
  • [49] Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
    Xu, Jinyang
    El Mansori, Mohamed
    Chen, Ming
    Ren, Fei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (9-12): : 3831 - 3851
  • [50] Investigations of vibration cutting mechanisms of Ti6Al4V alloy
    Sun, Zongtao
    Shuang, Fei
    Ma, Wei
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 148 : 510 - 530
12345