2D Finite Element Model and Microstructural Changes During Cutting of Ti6Al4V in Dry Condition

被引：1

作者：

Imbrogno, Stano ^{[1
]}

Rinaldi, Sergio ^{[1
]}

Seara, Borja ^{[2
]}

Arrazola, Pedro J. ^{[2
]}

Rotella, Giovanna ^{[1
]}

Umbrello, Domenico ^{[1
]}

机构：

[1] Univ Calabria, Dept Mech Energy & Management Engn, Via P Bucci Cubo 46c, I-87036 Arcavacata Di Rende, Italy

[2] Mondragon Univ, Mfg Dept, Arrasate Mondragon 20500, Spain

来源：

PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) | 2016年 / 1769卷

关键词：

TI-6AL-4V ALLOY; DEFORMATION; STRESS;

D O I：

10.1063/1.4963485

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The main objective of this study is to develop a FE model of the orthogonal cutting process executed on Titanium alloy (Ti6Al4V) under dry condition. In detail, the Abaqus/Explicit 2D formulation has been used to simulate the process and the results provided ( temperature and strain rate) where employed to calculate the microstructural and hardness changes on surface and sub-surface. The quantitative analysis in terms of the grain refinement and hardness variation during the cutting process has been provided taking into account the Zener-Hollomon and Hall-Petch equations. The obtained results were compared with the experimental outcomes in order to understand the reliable rate of the model.

引用

页数：6

共 50 条

[31] Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy
Cakir, Fatih Hayati
Gurgen, Selim
Sofuoglu, Mehmet Alper
Celik, Osman Nuri
Kushan, Melih Cemal
WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP, 2015, : 2839 - 2848
[32] Finite element prediction of the tool wear influence in Ti6Al4V machining
Ducobu, Francois
Arrazola, Pedro-Jose
Riviere-Lorphevre, Edouard
Filippi, Enrico
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 124 - 129
[33] Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions
Bakhshan, H.
Onate, E.
Carbonell, J. M.
JOURNAL OF MANUFACTURING PROCESSES, 2024, 131 : 73 - 92
[34] A novel finite element method for the wear analysis of cemented carbide tool during high speed cutting Ti6Al4V process
Yang Wang
Honghua Su
Jianbo Dai
Shubao Yang
The International Journal of Advanced Manufacturing Technology, 2019, 103 : 2795 - 2807
[35] A novel finite element method for the wear analysis of cemented carbide tool during high speed cutting Ti6Al4V process
Wang, Yang
Su, Honghua
Dai, Jianbo
Yang, Shubao
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (5-8): : 2795 - 2807
[36] Finite element Study of Ultrasonic Elliptical Vibration Turning of Ti6Al4V
Lu, Dong
Cai, Ligang
Cheng, Qiang
CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2, 2014, 494-495 : 383 - 386
[37] Finite element modeling of backward flow forming of Ti6Al4V alloy
Singh, Abhishek Kumar
Narasimhan, K.
Singh, Ramesh
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 24963 - 24970
[38] On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation
Ducobu, F.
Arrazola, P-J
Riviere-Lorphevre, E.
Filippi, E.
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2021, 14 (03) : 361 - 374
[39] Microstructural evolution during multiple scans in laser polishing of Ti6Al4V
Zhou, Jing
Shen, Hong
Lin, Yiwei
Liao, Conghao
Yu, Qinghua
JOURNAL OF MANUFACTURING PROCESSES, 2022, 75 : 1202 - 1216
[40] On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation
F. Ducobu
P.-J. Arrazola
E. Rivière-Lorphèvre
E. Filippi
International Journal of Material Forming, 2021, 14 : 361 - 374

← 1 2 3 4 5 →