Electrical Characterization of Al, Ag and In Contacts on CuInS2 Thin Films Deposited by Spray Pyrolysis

被引:0
|
作者
Manuel Peza-Tapia, Juan [1 ]
Morales-Acevedo, Arturo [1 ]
Ortega-Lopez, Mauricio [1 ]
机构
[1] CINVESTAV, SEES, Dept Elect Engn, Mexico City 07360, DF, Mexico
关键词
Ohmic contact; CuInS2 thin films; spray pyrolysis;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The specific contact resistivity (pc) for Aluminum (M), Silver (Ag) and Indium (In) metallic contacts on CuInS2 thin films have been determined, from I - V measurements, with the purpose of having the most appropriate ohmic contact for TCO/CdS/CuInS2 solar cells. pc was measured using the transmission line (TLM) method for the metallic contacts evaporated on CuInS2 thin films deposited by spray pyrolysis with ratios x = [Cu] / [In] = 1.0, 1.1, 1.3 and 1.5 in the spray solution. The results show that In contacts have the lowest rho(C) values for CuInS2 samples grown with x = 1.5. The minimum rho(C) was 0.26 ohm-cm(2) for the In contacts. This value, although not very low, will allow the fabrication of CuInS2 solar cells with a small series resistance.
引用
收藏
页码:205 / 209
页数:5
相关论文
共 50 条
  • [31] Deposition And Characterization Of CuInS2 thin films Deposited Over Copper thin films
    Thomas, Titu
    Kumar, K. Rajeev
    Kartha, C. Sudha
    Vijayakumar, K. P.
    PROCEEDINGS OF THE 59TH DAE SOLID STATE PHYSICS SYMPOSIUM 2014 (SOLID STATE PHYSICS), 2015, 1665
  • [32] Characterization of superstrate type CuInS2 solar cells deposited by spray pyrolysis method
    Ryo, Toshihiro
    Duy-Cuong Nguyen
    Nakagiri, Motohito
    Toyoda, Noriaki
    Matsuyoshi, Hiroaki
    Ito, Seigo
    THIN SOLID FILMS, 2011, 519 (21) : 7184 - 7188
  • [33] PREPARATION AND CHARACTERIZATION OF CHEMICALLY DEPOSITED CUINS2 THIN-FILMS
    PADAM, GK
    RAO, SUM
    SOLAR ENERGY MATERIALS, 1986, 13 (04): : 297 - 305
  • [34] Dispersive optical constants and electrical properties of nanocrystalline CuInS2 thin films prepared by chemical spray pyrolysis
    Dube, Phindani
    Juma, Albert O.
    Muiva, Cosmas M.
    CERAMICS INTERNATIONAL, 2020, 46 (06) : 7396 - 7402
  • [35] CuInS2 films using repeated chemical spray pyrolysis
    John, TT
    Wilson, KC
    Kumar, PMR
    Kartha, CS
    Vijayakumar, KP
    Kashiwaba, Y
    Abe, T
    Yasuhiro, Y
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2005, 202 (01): : 79 - 84
  • [36] Effect of the solution pH on the growth of spray-deposited CuInS2 thin films
    Ramaiah, KS
    Raja, VS
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 1999, 10 (02) : 145 - 149
  • [37] Synthesis and characteristics of spray deposited CuInS2 nanocrystals thin films for photovoltaic applications
    Khan, M. A. Majeed
    Kumar, Sushil
    AlSalhi, Mohamad S.
    MATERIALS RESEARCH BULLETIN, 2013, 48 (10) : 4277 - 4282
  • [38] Properties of Spray ILGAR CuInS2 thin films
    Camus, C.
    Allsop, N. A.
    Gledhill, S. E.
    Bohne, W.
    Roehrich, J.
    Lauermann, I.
    Lux-Steiner, M. C.
    Fischer, Ch. -H.
    THIN SOLID FILMS, 2008, 516 (20) : 7026 - 7030
  • [39] Composition and structure of CuInS2 films prepared by spray pyrolysis
    Krunks, M
    Mikli, V
    Bijakina, O
    Rebane, H
    Mere, A
    Varema, T
    Mellikov, E
    THIN SOLID FILMS, 2000, 361 : 61 - 64
  • [40] Electrical characterization of thin films of Al2O3 deposited on GaAs by spray pyrolysis technique
    Chavez-Ramirez, J.
    Aguilar-Frutis, M.
    Burillo, G.
    Lopez-Romero, S.
    Alvarez-Fregoso, O.
    Falcony, C.
    Flores-Morales, C.
    MATERIA-RIO DE JANEIRO, 2008, 13 (01): : 130 - 135