Pressure estimation in the hydroforming process of sheet metal pairs with the method of upper bound analysis

被引：14

作者：

Assempour, Ahmad ^{[1
]}

Emami, Mohammad Reza ^{[1
]}

机构：

[1] Sharif Univ Technol, Ctr Excellence Design Robot & Automat, Fac Mech Engn, Tehran, Iran

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 05期

关键词：

Hydroforming; Sheet metal pairs; Upper bound analysis; Kinematically admissible velocity field; Stretch;

D O I：

10.1016/j.jmatprotec.2008.05.020

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hydroforming is one of the new technologies in the manufacturing processes, in which hollow pieces are formed under pressure of a fluid. The basic parameter in this process is the pressure control of the fluid. This article deals with the process of hydroforming of a pair of metal sheets. After obtaining the kinematically admissible velocity field, the pressure equation is obtained by the upper bound analysis. This equation can be applied for each part if the instantaneous geometry of the deformed sheet in the die cavity zone during the process can be analytically expressed. The effects of the parameters of work-hardening, friction and blank size have been taken into considerations. To validate the results of this work a hemispherical part formed in the hydroforming of single-sheet process has been considered. The results obtained by this analysis have been compared with the experimental results. (c) 2008 Published by Elsevier B.V

引用

页码：2270 / 2276

页数：7

共 50 条

[41] Passive earth pressure analysis of berm-retained excavation by upper bound method
Qin H.-L.
Zhou Y.-Q.
Huang M.-S.
Zhou T.-H.
Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering, 2020, 42 (06): : 1101 - 1107
[42] Prediction of central bursting defects in rod extrusion process with upper bound analysis method
Parghazeh, Amir
Haghighat, Heshmatollah
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (11) : 2892 - 2899
[43] An upper bound wedge failure analysis method
Chen, ZY
Wang, YJ
Wang, XG
Wang, J
SLOPE STABILITY ENGINEERING, VOLS 1 & 2, 1999, : 325 - 328
[44] An Analysis of Electromagnetic Sheet Metal Forming Process
Paese, E.
Rosa, P. A. R.
Geier, M.
Homrich, R. P.
Rossi, R.
MECHANICAL ENGINEERING AND INSTRUMENTATION, 2014, 526 : 9 - +
[45] Numerical analysis of the sheet metal extrusion process
Zheng, PF
Chan, LC
Lee, TC
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2005, 42 (03) : 189 - 207
[46] An upper-bound analysis of friction in metal forming
Wang, SL
Rao, KP
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1997, 39 (02) : 201 - 209
[47] Upper-bound analysis of friction in metal forming
City Univ of Hong Kong, Kowloon, Hong Kong
Int J Mech Sci, 2 (201-209):
[48] Numerical simulation method of sheet metal stamping process
Chen, Z.K.
Shi, F.Z.
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2001, 27 (03): : 340 - 343
[49] AN UPPER-BOUND ANALYSIS OF AN AXISYMMETRICAL COINING PROCESS
MONAGHAN, JM
JOURNAL OF MECHANICAL WORKING TECHNOLOGY, 1988, 16 (02): : 175 - 192
[50] An upper-bound analysis for frictionless TCAP process
G. Faraji
K. Abrinia
M. M. Mashhadi
M. Hamdi
Archive of Applied Mechanics, 2013, 83 : 483 - 493

← 1 2 3 4 5 →