Pressure estimation in the hydroforming process of sheet metal pairs with the method of upper bound analysis

被引：14

作者：

Assempour, Ahmad ^{[1
]}

Emami, Mohammad Reza ^{[1
]}

机构：

[1] Sharif Univ Technol, Ctr Excellence Design Robot & Automat, Fac Mech Engn, Tehran, Iran

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2009年 / 209卷 / 05期

关键词：

Hydroforming; Sheet metal pairs; Upper bound analysis; Kinematically admissible velocity field; Stretch;

D O I：

10.1016/j.jmatprotec.2008.05.020

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hydroforming is one of the new technologies in the manufacturing processes, in which hollow pieces are formed under pressure of a fluid. The basic parameter in this process is the pressure control of the fluid. This article deals with the process of hydroforming of a pair of metal sheets. After obtaining the kinematically admissible velocity field, the pressure equation is obtained by the upper bound analysis. This equation can be applied for each part if the instantaneous geometry of the deformed sheet in the die cavity zone during the process can be analytically expressed. The effects of the parameters of work-hardening, friction and blank size have been taken into considerations. To validate the results of this work a hemispherical part formed in the hydroforming of single-sheet process has been considered. The results obtained by this analysis have been compared with the experimental results. (c) 2008 Published by Elsevier B.V

引用

页码：2270 / 2276

页数：7

共 50 条

[31] Analysis of Sheet Metal Extrusion Process Using Finite Element Method
Zhuang X.-C.
Xiang H.
Zhao Z.
International Journal of Automation and Computing, 2010, 7 (03) : 295 - 302
[32] Deformation of large curved shells using double-sided pressure sheet hydroforming process
Liu W.
Chen Y.-Z.
Hu L.
Zhang Z.-C.
International Journal of Lightweight Materials and Manufacture, 2022, 5 (03) : 397 - 410
[33] Study on hybrid hydroforming process of sheet metal with multi-concave and convex surface parts
Xiao, X. T.
Qi, C. X.
Wu, F.
Zhani, Z. R.
Chen, M. T.
Zhou, F. Q.
Chen, X. L.
Zhou, X. S.
19TH INTERNATIONAL CONFERENCE ON METAL FORMING, MF 2022, 2022, 1270
[34] EXTENSION OF THE UPPER BOUND METHOD TO INCLUDE ESTIMATION OF STRESSES
AZARKHIN, A
RICHMOND, O
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1991, 58 (02): : 493 - 498
[35] APPLICATIONS OF UPPER BOUND ESTIMATION METHOD IN REACTOR THEORY
RONEN, Y
REGEV, D
NUCLEAR SCIENCE AND ENGINEERING, 1978, 66 (01) : 124 - 127
[36] An upper bound analysis of the ring rolling process
Parvizi, Ali
Abrinia, Karen
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 2819 - +
[37] A study of the application of upper bound method to the CONFORM process
Kim, YH
Cho, JR
Kim, KS
Jeong, HS
Yoon, SS
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 97 (1-3) : 153 - 157
[38] An experimental and numerical study to analysis and design of sheet hydroforming process for an automobile fender shell
Parsa, Mohammad Habibi
Darbandi, Payam
Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 4, 2006, : 865 - 869
[39] ANALYSIS OF AXISYMMETRIC CUP FORMING OF METAL FOIL AND MICRO HYDROFORMING PROCESS
Sato, Hideki
Manabe, Ken-ichi
Wei, Dongbin
Jiang, Zhengyi
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 10, 2014,
[40] Analysis of forming properties and hydroforming process of braided fiber metal laminates
Li L.
Lang L.
Blala H.
Wang H.
Cao X.
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2020, 51 (09): : 2422 - 2429

← 1 2 3 4 5 →