Open hole fatigue testing of laser machined MD-CFRPs

被引：28
|
作者：
Kalyanasundaram, Dinesh [1 ]
Gururaja, Suhasini [2 ]
Prabhune, Prajakta [2 ]
Singh, Dilpreet [1 ]
机构：
[1] IIT, Ctr Biomed Engn, Delhi, India
[2] Indian Inst Sci IISc, Aerosp Engn, Bangalore 12, Karnataka, India
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2018年 / 111卷
关键词：
Polymer-matrix composites (PMCs); Fatigue; CT analysis; Ultrasonics; Machining; FIBER-REINFORCED COMPOSITES; DAMAGE; DELAMINATION; STRENGTH; SPECIMENS; PLASTICS; LIFE; FRPS;
D O I：
10.1016/j.compositesa.2018.05.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of fiber laser machining (FLM) on multi-directional carbon fiber reinforced plastics (MD-CFRP) with [0/90/45/ - 45]s lay-up was studied under tension-tension fatigue with stress ratio R = 0.1 for an open hole fatigue (OHF) test configuration. The FLM parameters were chosen to yield a heat affected zone (HAZ) corresponding to a damage factor of approximately 1.4. The growth of this initial damage under tension-tension fatigue was investigated using digital image correlation (DIC), and damage growth characterization was carried out using scanning acoustic microscopy (SAM) and micro computed tomography (micro-CT). The endurance limit of the MD-CFRPs was evaluated by examining the fatigue life at 70, 50 and 30% of its ultimate tensile strength. Results show a strong correlation of damage mode on the applied load levels like conventionally machined samples.
引用
收藏
页码：33 / 41
页数：9
相关论文
共 50 条
  • [31] An investigation into the damage development and residual strengths of open-hole specimens in fatigue
    Nixon-Pearson, O. J.
    Hallett, S. R.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 69 : 266 - 278
  • [32] Fatigue performance of open-hole structural elements reinforced by CFRP overlays
    Romanowicz, Pawel J.
    Szybiński, Bogdan
    Wygoda, Mateusz
    International Journal of Adhesion and Adhesives, 1600, 130
  • [33] Application of pressure distribution valve in testing stem of open hole test
    Well Testing Company, Xingjiang Petroleum Administrative Bureau
    Well Test., 2006, 2 (73-74+78):
  • [34] Effects of surface quality and loading history on fatigue life of laser-machined poly(methyl methacrylate)
    Abar, Farzad
    Abadyan, Mohamadreza
    Aghazade, Jamshid
    MATERIALS & DESIGN, 2015, 65 : 473 - 481
  • [35] High-precision micro-through-hole array in quartz glass machined by infrared picosecond laser
    Ji, Lingfei
    Hu, Yan
    Li, Jian
    Wang, Wenhao
    Jiang, Yijian
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2015, 121 (03): : 1163 - 1169
  • [36] High-precision micro-through-hole array in quartz glass machined by infrared picosecond laser
    Institute of Laser Engineering, Beijing University of Technology, Beijing
    100124, China
    Appl Phys A, 3 (1163-1169):
  • [37] High-precision micro-through-hole array in quartz glass machined by infrared picosecond laser
    Lingfei Ji
    Yan Hu
    Jian Li
    Wenhao Wang
    Yijian Jiang
    Applied Physics A, 2015, 121 : 1163 - 1169
  • [38] A Contactless Laser Doppler Strain Sensor for Fatigue Testing with Resonance-Testing Machine
    Wang, Fangjian
    Krause, Steffen
    Hug, Joachim
    Rembe, Christian
    SENSORS, 2021, 21 (01) : 1 - 14
  • [39] Fatigue Property of Open-Hole Steel Plates Influenced by Bolted Clamp-up and Hole Fabrication Methods
    Wang, Zhi-Yu
    Li, Lihui
    Liu, Yong-Jie
    Wang, Qing-Yuan
    MATERIALS, 2016, 9 (08):
  • [40] QUASI-STATIC AND FATIGUE EVALUATION OF LASER MACHINED CF-PPS AND CF-PEI COMPOSITES
    Hansen, Peter
    Perez, Sandra Royo
    Staehr, Richard
    Jaeschke, Peter
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
12345