Fabrication of GaSb microlenses by photo and e-beam lithography and dry etching

被引：1
|
作者：
Papis, E
Piotrowska, A
Piotrowski, TT
Golaszewska, K
Ilka, L
Kruszka, R
Ratajczak, J
Katcki, J
Wróbel, J
Aleszkiewicz, M
Lukasiewicz, R
机构：
[1] Inst Electr Mat Technol, PL-02668 Warsaw, Poland
[2] Polish Acad Sci, Inst Phys, PL-02668 Warsaw, Poland
[3] Warsaw Univ Technol, Inst Microelect & Optoelect, PL-00672 Warsaw, Poland
来源：
FUNCTIONAL NANOMATERIALS FOR OPTOELECTRONICS AND OTHER APPLICATIONS | 2004年 / 99-100卷
关键词：
GaSb; microlens; sputter etching; reactive ion etching;
D O I：
10.4028/www.scientific.net/SSP.99-100.83
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fabrication of surface-relief microstructures in GaSb for application in mid-infrared optoelectronic devices is described. Photo- and e-beam lithography was used to define patterns on GaSb surfaces. Ar/O-2 sputter etching and RIE in BCl3-based plasma were applied to transfer preshaped master into the GaSb substrate. Circular microlenses with an aspect ratio (height to diameter) 0.4/10 mum and circular gratings with 0.4 mum linewidth/1 mum period and 1.7 mum depth have been demonstrated.
引用
收藏
页码：83 / 86
页数：4
相关论文
共 50 条
  • [41] Hybrid Lithography for Triple Patterning Decomposition and E-Beam Lithography
    Tian, Haitong
    Zhang, Hongbo
    Xiao, Zigang
    Wong, Martin D. F.
    OPTICAL MICROLITHOGRAPHY XXVII, 2014, 9052
  • [42] A Study of Conductive Material for E-beam Lithography
    Wang, Wen-Yun
    Liu, Chen-Yu
    Chien, Tsung-Chih
    Huang, Chun-Ching
    Lin, Shy-Jay
    Chang, Ya-Hui
    Chen, Jack J. H.
    Chang, Ching-Yu
    Ku, Yao-Ching
    Lin, Burn J.
    ADVANCES IN RESIST MATERIALS AND PROCESSING TECHNOLOGY XXVIII, 2011, 7972
  • [43] E-beam lithography for micro-/nanofabrication
    Altissimo, Matteo
    BIOMICROFLUIDICS, 2010, 4 (02):
  • [44] FABRICATION OF 100 NM POLYSILICON-EMITTER TRANSISTORS USING E-BEAM LITHOGRAPHY
    WEBSTER, MN
    TUINHOUT, A
    VERBRUGGEN, AH
    ROMIJN, J
    RADELAAR, S
    LOCHEL, B
    JOS, HFF
    MOORS, PMA
    MICROELECTRONIC ENGINEERING, 1995, 27 (1-4) : 91 - 94
  • [45] SUB-HALF-MICROMETER GRATINGS USING E-BEAM LITHOGRAPHY AND REACTIVE ION ETCHING
    FALLAHI, M
    BARBER, R
    CANADIAN JOURNAL OF PHYSICS, 1991, 69 (3-4) : 508 - 511
  • [46] RESIST PROFILE OPTIMIZATION IN E-BEAM LITHOGRAPHY
    GILLESPIE, SJ
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1982, 129 (06) : C232 - C232
  • [47] Tunable periodic graphene antidot lattices fabricated by e-beam lithography and oxygen ion etching
    Liu, L. Z.
    Tian, S. B.
    Long, Y. Z.
    Li, W. X.
    Yang, H. F.
    Li, J. J.
    Gu, C. Z.
    VACUUM, 2014, 105 : 21 - 25
  • [48] Cross sectional TEM sample preparation using e-beam lithography and reactive ion etching
    Cho, HJ
    Griffin, PB
    Plummer, JD
    SPECIMEN PREPARATION FOR TRANSMISSION ELECTRON MICROSCOPY OF MATERIALS IV, 1997, 480 : 217 - 224
  • [49] Fabrication of high-Q chalcogenide photonic crystal resonators by e-beam lithography
    Ruan, Yinlan
    Kim, Myung-Ki
    Lee, Yong-Hee
    Luther-Davies, Barry
    Rode, Andrei
    APPLIED PHYSICS LETTERS, 2007, 90 (07)
  • [50] Maskless EUV lithography, an alternative to e-beam
    Johnson, Kenneth C.
    JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, 2019, 18 (04):
12345