Annealing temperature effect on field emission of silicon emitter arrays with sol-gel (Ba0.65Sr0.35)TiO3 coatings

被引：4
|
作者：
Lu, H.
Chen, F.
Zhu, W. G.
Pan, J. S.
Tan, O. K.
机构：
[1] Nanyang Technol Univ, Ctr Microelect, Sch Elect & Elect Engn, Singapore 639798, Singapore
[2] Inst Mat Res & Engn, Singapore 117602, Singapore
来源：
FERROELECTRICS | 2006年 / 334卷
关键词：
BST thin film; electron emission; sol-gel;
D O I：
10.1080/00150190600695941
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ba0.65Sr0.35TiO3 (BST) thin films have been fabricated on silicon field emitter arrays (FEAs) using sol-gel coating for electron emission applications. The BSTcoatings exhibit the perovskite structure when annealed between 650 and 700 degrees C, and an interfacial reaction occurs when annealed above 750 degrees C The threshold electric field is lowered from 36 V/mu m for bare silicon tips to 19 V/mu m for BST-coated silicon tips. The oxygen vacancy concentration increases for BST thin films annealed from 600 to 750 degrees C, and decreases above 750 degrees C, leading to the Fermi energy shift. The electron emission behavior is correlated to both the microstructure and electronic structure of the BST thin films.
引用
收藏
页码：253 / 261
页数：9
相关论文
共 50 条
  • [21] Low voltage tunable thin films of ferroelectric Ba0.65Sr0.35TiO3 synthesized by sol-gel method
    Sharma, PK
    Jose, KA
    Varadan, VK
    Varadan, VV
    JOURNAL OF ADVANCED MATERIALS, 2004, 36 (01): : 12 - 17
  • [22] Influences of annealing temperature on the optical and structural properties of (Ba,Sr)TiO3 thin films derived from sol-gel technique
    Tian, HY
    Luo, WG
    Ding, AL
    Choi, JW
    Lee, C
    No, K
    THIN SOLID FILMS, 2002, 408 (1-2) : 200 - 205
  • [23] Electron emission characteristics of sol-gel (Ba0.67Sr0.33)TiO3 thin film coated silicon tips
    Gurbuz, Y.
    Kang, W. P.
    Davidson, J. L.
    Tan, O. K.
    Zhu, W. G.
    Li, Q.
    Xu, J. F.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2007, 25 (05): : 1560 - 1568
  • [24] Nonlinear dielectric properties of sol-gel derived (Ba,Sr)TiO3 ceramics
    Liu, Q. X.
    Tang, X. G.
    Deng, Y. Y.
    Wang, J.
    Chan, H. L. W.
    MATERIALS CHEMISTRY AND PHYSICS, 2008, 112 (01) : 281 - 284
  • [25] FABRICATION AND DIELECTRIC PROPERTIES OF SOL-GEL DERIVED (Ba,Sr)TiO3 CERAMICS
    Osinska, K.
    Maszybrocka, J.
    Plewa, J.
    Czekaj, D.
    ARCHIVES OF METALLURGY AND MATERIALS, 2009, 54 (04) : 911 - 922
  • [26] Dielectric properties of tape cast Ba0.65Sr0.35TiO3 derived from sol-gel for application in multilayered capacitors
    Sharma, PK
    Varadan, VV
    Varadan, VK
    SMART MATERIALS AND STRUCTURES, 2003, 12 (05) : 749 - 756
  • [27] Electron emission from silicon tips coated with sol-gel (Ba0.67Sr0.33)TiO3 ferroelectric thin film
    Kang, WP
    Wisitsora-at, A
    Davidson, JL
    Tan, OK
    Zhu, WG
    Li, Q
    Xu, JF
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2001, 19 (03): : 1073 - 1076
  • [28] Dielectric properties of Fe-doped Ba0.65Sr0.35TiO3 thin films fabricated by the sol-gel method
    Ye, Yun
    Guo, Tailiang
    CERAMICS INTERNATIONAL, 2009, 35 (07) : 2761 - 2765
  • [29] Fabrication of (Ba,Sr)TiO3 thin films by hydrothermal crystallization of sol-gel precursor
    Ma, Jingyun
    Miao, Hongyan
    Tan, Guoqiang
    Sun, Zhengqiu
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 95 - +
  • [30] Preparation of (Ba0.5Sr0.5) TiO3 thin films by sol-gel method with rapid thermal annealing
    Wu, D
    Li, AD
    Ling, HQ
    Yin, XB
    Ge, CZ
    Wang, M
    Ming, NB
    APPLIED SURFACE SCIENCE, 2000, 165 (04) : 309 - 314
12345