Optimization of process parameters for ultrasonic drilling of advanced engineering ceramics using the Taguchi approach

被引：24
|
作者：
Jadoun, R. S. [1 ]
Kumar, Pradeep
Mishra, B. K.
Mehta, R. C. S.
机构：
[1] Govind Ballabh Pant Univ Agr & Technol, Coll Technol, Dept Prod Engn, Pantnagar 263145, Uttar Pradesh, India
[2] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
来源：
ENGINEERING OPTIMIZATION | 2006年 / 38卷 / 07期
关键词：
ultrasonic drilling; alumina-based ceramics; engineering ceramics; cutting ratio; Taguchi method; optimization;
D O I：
10.1080/03052150600733962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of process parameters on the cutting ratio (ratio of material removal rate to tool wear rate) for ultrasonic drilling of alumina-based ceramics using silicon carbide abrasive was studied. The parameters considered were workpiece material, tool material, grit size of the abrasive, power rating, and slurry concentration. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on cutting ratio were studied. The results obtained were validated by conducting confirmation experiments.
引用
收藏
页码：771 / 787
页数：17
相关论文
共 50 条
  • [41] Parametric optimization of EDM process on α-β brass using Taguchi approach
    Marichamy, S.
    Saravanan, M.
    Ravichandran, M.
    Veerappan, G.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2016, 57 (06) : 586 - 598
  • [42] Parametric optimization of EDM process on α–β brass using Taguchi approach
    S. Marichamy
    M. Saravanan
    M. Ravichandran
    G. Veerappan
    Russian Journal of Non-Ferrous Metals, 2016, 57 : 586 - 598
  • [43] Optimization of Drilling Parameters of GFRP with Liquid Silicone Rubber and Fine Silica Powder by Taguchi Approach
    Kulkarni, Giridhar S.
    Shivashankar, G. S.
    Suresh, R.
    Siddeshkumar, N. G.
    SILICON, 2020, 12 (07) : 1651 - 1666
  • [44] Optimization of Drilling Parameters of GFRP with Liquid Silicone Rubber and Fine Silica Powder by Taguchi Approach
    Giridhar S. Kulkarni
    G. S. Shivashankar
    R. Suresh
    N. G. Siddeshkumar
    Silicon, 2020, 12 : 1651 - 1666
  • [45] Laser wafer dicing process optimization using the Taguchi approach
    Yang, Chih-Fu
    Chang, Chih-Tsung
    Wang, Rui-Teng
    Kao, Jin-Yih
    Hsu, Chun-Yao
    JOURNAL OF LASER APPLICATIONS, 2024, 36 (03)
  • [46] Selection of Optimal Process Parameters for Minimizing Burr Size in Drilling Using Taguchi's Quality Loss Function Approach
    Gaitonde, V. N.
    Karnik, S. R.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2012, 34 (03) : 238 - 245
  • [47] Fracture at the exit of the hole during the ultrasonic drilling of engineering ceramics
    Zhang, QH
    Zhang, JH
    Jia, ZX
    Ai, X
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 84 (1-3) : 20 - 24
  • [48] Optimization of Process Parameters of Die Slide Injection by Using Taguchi Method
    Jeong, Soo-Jin
    Moon, Seong-Joon
    Jeoung, Sun-Kyoung
    Lee, Pyoung-Chan
    Moon, Ju-ho
    KOREAN CHEMICAL ENGINEERING RESEARCH, 2012, 50 (02): : 264 - 269
  • [49] Optimization of essential parameters in green sand process to minimize persisting casting defects using taguchi approach
    Aloni S.N.
    Journal of Engineering Science and Technology Review, 2019, 12 (05): : 127 - 138
  • [50] Optimization on the Turning Process Parameters of SS 304 Using Taguchi and TOPSIS
    Rathod N.J.
    Chopra M.K.
    Chaurasiya P.K.
    Vidhate U.S.
    Dasore A.
    Annals of Data Science, 2023, 10 (05) : 1405 - 1419
12345