Optimization of process parameters for ultrasonic drilling of advanced engineering ceramics using the Taguchi approach

被引：24
|
作者：
Jadoun, R. S. [1 ]
Kumar, Pradeep
Mishra, B. K.
Mehta, R. C. S.
机构：
[1] Govind Ballabh Pant Univ Agr & Technol, Coll Technol, Dept Prod Engn, Pantnagar 263145, Uttar Pradesh, India
[2] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
来源：
ENGINEERING OPTIMIZATION | 2006年 / 38卷 / 07期
关键词：
ultrasonic drilling; alumina-based ceramics; engineering ceramics; cutting ratio; Taguchi method; optimization;
D O I：
10.1080/03052150600733962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of process parameters on the cutting ratio (ratio of material removal rate to tool wear rate) for ultrasonic drilling of alumina-based ceramics using silicon carbide abrasive was studied. The parameters considered were workpiece material, tool material, grit size of the abrasive, power rating, and slurry concentration. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on cutting ratio were studied. The results obtained were validated by conducting confirmation experiments.
引用
收藏
页码：771 / 787
页数：17
相关论文
共 50 条
  • [21] Optimization of process parameters for drilled hole quality characteristics during cortical bone drilling using Taguchi method
    Singh, Gurmeet
    Jain, Vivek
    Gupta, Dheeraj
    Ghai, Aman
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2016, 62 : 355 - 365
  • [22] Optimization of drilling process parameters of AA7150/MoO3 composites using Taguchi method
    Vasudevan, A.
    Kolappan, S.
    Subramani, K.
    MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 251 - 256
  • [23] The optimization of the operational parameters of a rotary percussive drilling machine using the Taguchi method
    Derdour, Fatima Zohra
    Kezzar, Mohamed
    Bennis, Ouafae
    Khochmane, Lakhdar
    WORLD JOURNAL OF ENGINEERING, 2018, 15 (01) : 62 - 69
  • [24] The mechanism of material removal in ultrasonic drilling of engineering ceramics
    Zhang, QH
    Wu, CL
    Sun, JL
    Jia, ZX
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2000, 214 (09) : 805 - 810
  • [25] Optimization of vacuum casting process parameters using Taguchi method
    Ahmad, Mohd Nazri
    Alkahari, Mohd Rizal
    Basir, Mohamad Faris Mohd
    Maidin, Nurul Ain
    Wahid, Mohammad Khalid
    Ab Rahman, Mohd Hidayat
    Osman, Mohd Hairizal
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 146 - 147
  • [26] Optimization of squeeze casting process parameters using Taguchi analysis
    Vijian, P.
    Arunachalam, V.P.
    International Journal of Advanced Manufacturing Technology, 2007, 33 (11-12): : 1122 - 1127
  • [27] Optimization of squeeze casting process parameters using Taguchi analysis
    Vijian, P.
    Arunachalam, V. P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 33 (11-12): : 1122 - 1127
  • [28] Optimization of squeeze casting process parameters using Taguchi analysis
    P. Vijian
    V. P. Arunachalam
    The International Journal of Advanced Manufacturing Technology, 2007, 33 : 1122 - 1127
  • [29] Optimization of Powder Spray Process Parameters using Taguchi Methodology
    Karidkar, S.
    Mali, R.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON COMMUNICATION AND SIGNAL PROCESSING 2016 (ICCASP 2016), 2017, 137 : 71 - 76
  • [30] Optimization of Wire EDM process parameters using Taguchi technique
    Mohamed, M. Fakkir
    Lenin, K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 527 - 530
12345