Optimization of process parameters for ultrasonic drilling of advanced engineering ceramics using the Taguchi approach

被引：24
|
作者：
Jadoun, R. S. [1 ]
Kumar, Pradeep
Mishra, B. K.
Mehta, R. C. S.
机构：
[1] Govind Ballabh Pant Univ Agr & Technol, Coll Technol, Dept Prod Engn, Pantnagar 263145, Uttar Pradesh, India
[2] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
来源：
ENGINEERING OPTIMIZATION | 2006年 / 38卷 / 07期
关键词：
ultrasonic drilling; alumina-based ceramics; engineering ceramics; cutting ratio; Taguchi method; optimization;
D O I：
10.1080/03052150600733962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of process parameters on the cutting ratio (ratio of material removal rate to tool wear rate) for ultrasonic drilling of alumina-based ceramics using silicon carbide abrasive was studied. The parameters considered were workpiece material, tool material, grit size of the abrasive, power rating, and slurry concentration. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on cutting ratio were studied. The results obtained were validated by conducting confirmation experiments.
引用
收藏
页码：771 / 787
页数：17
相关论文
共 50 条
  • [1] Taguchi's optimization of process parameters for production accuracy in ultrasonic drilling of engineering ceramics
    Jadoun, R. S.
    Kumar, Pradeep
    Mishra, B. K.
    PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2009, 3 (03): : 243 - 253
  • [2] APPLICATION OF TAGUCHI METHOD IN THE OPTIMIZATION OF PROCESS PARAMETERS FOR CONICITY OF HOLES IN ULTRASONIC DRILLING OF E\NGINEERING CERAMICS
    Mehta, R. C. S.
    Jadoun, R. S.
    Kumar, Pradeep
    Mishra, B. K.
    ADVANCED PROCESSING AND MANUFACTURING TECHNOLOGIES FOR STRUCTURAL AND MULTIFUNCTIONAL MATERIALS, 2008, 28 (07): : 167 - +
  • [3] Parameters optimization on the lapping process for advanced ceramics by applying Taguchi method
    Yuan, Julong
    Lv, Binghai
    Zhou, Zhaozhong
    Tao, Baochun
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 488 - +
  • [4] Optimization of process parameters in drilling of GFRP composite using Taguchi method
    Vankanti, Vinod Kumar
    Ganta, Venkateswarlu
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2014, 3 (01): : 35 - 41
  • [5] OPTIMIZATION OF PROCESS PARAMETERS IN DRILLING OF SMC COMPOSITES USING TAGUCHI METHOD
    Can, Ahmet
    Unuvar, Ali
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2017, 24 (02): : 435 - 442
  • [6] Optimization of rotary ultrasonic drilling of optical glass using Taguchi method and utility approach
    Kumar, Vikas
    Singh, Hari
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2019, 22 (03): : 956 - 965
  • [7] Furfural degradation using an electrochemical advanced oxidation process (EAOP): optimization of operating parameters using Taguchi approach
    Azarian, Ghasem
    Leili, Mostafa
    Godini, Kazem
    Faradmal, Javad
    Bajalan, Somayeh
    DESALINATION AND WATER TREATMENT, 2018, 126 : 287 - 295
  • [8] Process parameters optimization using Taguchi and RSM to minimize the damage in the drilling of GFRP composites
    Murthy, B.R.N.
    Rodrigues, Lewlyn L.R.
    International Journal of Earth Sciences and Engineering, 2013, 6 (04): : 842 - 846
  • [9] Optimization of roundness in plasma arc drilling process by Taguchi approach
    Rathinasuriyan, C.
    Chandar, J. Bharani
    Palanisamy, R.
    MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 278 - 282
  • [10] Optimization and Modeling of Process Parameters in Multi-Hole Simultaneous Drilling Using Taguchi Method and Fuzzy Logic Approach
    Aamir, Muhammad
    Tu, Shanshan
    Tolouei-Rad, Majid
    Giasin, Khaled
    Vafadar, Ana
    MATERIALS, 2020, 13 (03)
12345