An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel

被引：473
|
作者：
Torres, MAS
Voorwald, HJC
机构：
[1] State Univ Sao Paulo, Dept Mech, UNESP, FEG, BR-12516410 Guaratingueta, SP, Brazil
[2] State Univ Sao Paulo, Dept Mat & Technol, BR-12516410 Guaratingueta, SP, Brazil
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2002年 / 24卷 / 08期
关键词：
shot peening; residual stress; 4340; steel; fatigue;
D O I：
10.1016/S0142-1123(01)00205-5
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Shot peening is a method widely used to improve the fatigue strength of materials. through the creation of a compressive residual stress field (CRSF) in their surface layers. In the present research the gain in fatigue life of AISI 4340 steel, Used in landing gear. is evaluated under four Shot peening conditions. Rotating bending fatigue tests were conducted and the CRSF was measured by an X-ray tensometry prior and during fatigue tests. It was observed that relaxation of the CRSF occurred due to the fatigue process. In addition, the fractured fatigue specimens were investigated using a scanning electron microscope in order to obtain information about the crack initiation points. The evaluation of fatigue life, relaxation of CRSF and crack sources are discussed. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：877 / 886
页数：10
相关论文
共 50 条
  • [41] Influence of Shot Peening on Residual Stress Distribution and Corrosion Resistance of Additive Manufactured Stainless Steel AISI 316L
    A. Vinoth Jebaraj
    M. Sugavaneswaran
    Transactions of the Indian Institute of Metals, 2019, 72 : 1651 - 1653
  • [42] Finite Element Modeling of Shot Peening Residual Stress Relaxation in Turbine Disk Assemblies
    Meguid, S. A.
    Maricic, Luke A.
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (03):
  • [43] Influence of Shot Peening on Residual Stress Distribution and Corrosion Resistance of Additive Manufactured Stainless Steel AISI 316L
    Jebaraj, A. Vinoth
    Sugavaneswaran, M.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1651 - 1653
  • [44] Numerical Study of Fatigue Crack Propagation in a Residual Stress Field Induced by Shot Peening
    Wang, Cheng
    Wu, Guang
    He, Tao
    Zhou, Yijun
    Zhou, Zechen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (08) : 5525 - 5539
  • [45] Numerical Study of Fatigue Crack Propagation in a Residual Stress Field Induced by Shot Peening
    Cheng Wang
    Guang Wu
    Tao He
    Yijun Zhou
    Zechen Zhou
    Journal of Materials Engineering and Performance, 2020, 29 : 5525 - 5539
  • [46] Research Progress of the Effect of Shot Peening Residual Stress on Fatigue Performance and Deformation Control
    Zhang J.
    Yao C.
    Tan L.
    Cui M.
    Zhou Z.
    Sun Y.
    Li G.
    Fan Y.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (06): : 46 - 60
  • [47] Overall evaluation of the effect of residual stress induced by shot peening in the improvement of fatigue fracture resistance for metallic materials
    Renzhi Wang
    Jilai Ru
    Chinese Journal of Mechanical Engineering, 2015, 28 : 416 - 421
  • [48] Overall Evaluation of the Effect of Residual Stress Induced by Shot Peening in the Improvement of Fatigue Fracture Resistance for Metallic Materials
    Wang Renzhi
    Ru Jilai
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2015, 28 (02) : 416 - 421
  • [49] THERMAL RELAXATION OF SHOT-PEENING-INDUCED RESIDUAL-STRESS IN QUENCHED AND TEMPERED STEEL 42 CRMO 4
    SCHULZE, V
    BURGAHN, F
    VOHRINGER, O
    MACHERAUCH, E
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1993, 24 (07) : 258 - 267
  • [50] Overall Evaluation of the Effect of Residual Stress Induced by Shot Peening in the Improvement of Fatigue Fracture Resistance for Metallic Materials
    WANG Renzhi
    RU Jilai
    Chinese Journal of Mechanical Engineering, 2015, 28 (02) : 416 - 421
12345