An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel

被引：473
|
作者：
Torres, MAS
Voorwald, HJC
机构：
[1] State Univ Sao Paulo, Dept Mech, UNESP, FEG, BR-12516410 Guaratingueta, SP, Brazil
[2] State Univ Sao Paulo, Dept Mat & Technol, BR-12516410 Guaratingueta, SP, Brazil
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2002年 / 24卷 / 08期
关键词：
shot peening; residual stress; 4340; steel; fatigue;
D O I：
10.1016/S0142-1123(01)00205-5
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Shot peening is a method widely used to improve the fatigue strength of materials. through the creation of a compressive residual stress field (CRSF) in their surface layers. In the present research the gain in fatigue life of AISI 4340 steel, Used in landing gear. is evaluated under four Shot peening conditions. Rotating bending fatigue tests were conducted and the CRSF was measured by an X-ray tensometry prior and during fatigue tests. It was observed that relaxation of the CRSF occurred due to the fatigue process. In addition, the fractured fatigue specimens were investigated using a scanning electron microscope in order to obtain information about the crack initiation points. The evaluation of fatigue life, relaxation of CRSF and crack sources are discussed. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：877 / 886
页数：10
相关论文
共 50 条
  • [21] Effect of shot peening time on δ/γ residual stress profiles of AISI 304 weld
    Lai, Hsuan-Han
    Cheng, Hao-Chun
    Lee, Chen-Yu
    Lin, Chi-Ming
    Wu, Weite
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 284
  • [22] Shot-Peening Time Effect on the Mechanical Properties of AISI 4340 Steel
    Jung, Young Hoon
    Kim, Beom Joon
    Kim, Hyogeon
    Kim, Seong Hwan
    Shin, Sang-Yun
    Lee, Seok Gyu
    Baek, Minjae
    Lee, Dong Jun
    Choi, In-Chul
    Kim, Jung Gi
    METALS AND MATERIALS INTERNATIONAL, 2025, 31 (03) : 692 - 700
  • [23] Prediction of the effect of shot peening residual stress on fretting fatigue behaviour
    Wang, Can
    Fan, Kaifa
    Li, Chao
    Wahab, Magd Abdel
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 176
  • [24] Experimental Study on the Effect of Shot Peening and Re-Shot Peening on the Residual Stress Distribution and Fatigue Life of 20CrMnTi
    Qian, Wenxue
    Wang, Yi
    Liu, Kexin
    Yin, Xiaowei
    He, Xuehong
    Xie, Liyang
    COATINGS, 2023, 13 (07)
  • [25] Effect of shot peening on the residual stress and microstructure of duplex stainless steel
    Feng, Qiang
    Jiang, Chuanhai
    Xu, Zhou
    Xie, Lechun
    Ji, Vincent
    SURFACE & COATINGS TECHNOLOGY, 2013, 226 : 140 - 144
  • [26] Effects of stress- and/or warm peening of AISI 4140 on fatigue life
    Wick, A
    Schulze, V
    Vöhringer, O
    STEEL RESEARCH, 2000, 71 (08): : 316 - 321
  • [27] Investigation of residual stress, stress relaxation and work hardening effects induced by shot peening on the fatigue life of AA 6005-T6 aluminum alloy
    Fernandes, Martin Ferreira
    Santos Torres, Marcelo Augusto
    Cindra Fonseca, Maria da Penha
    Reis Pereira Baptista, Carlos Antonio
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [28] Residual stress profile and fatigue life of 7050 aluminum plate with groove under laser shot peening
    Gou L.
    Ma Y.
    Du Y.
    Liu L.
    Guo C.
    Li G.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2019, 40 (12):
  • [29] Effect of residual stress by shot peening on fatigue strength of LCV leaf spring
    Bae, DH
    Sohn, IS
    Jung, WS
    Kim, NS
    Jung, WW
    Park, SC
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2005, 6 (06) : 671 - 676
  • [30] Evaluation residual stress relaxation induced by shot peening parameters and its effect on fatigue of 2024-T351 aluminum alloy
    Ali, Fareg Saeid
    Omran, Abdoulhdi A. Borhana
    Zaroog, Omar Suliman
    Test Engineering and Management, 2019, 81 : 5693 - 5701
12345